Up a level |
ADEKANYE, TIMOTHY and Oni, Kayode Energy use in cassava production. Environmental and Sustainability Indicators, 14 (1). pp. 1-7.
ADERINLEWO, A. A. and RAJI, A. O. and Olayanju, T.M.A. (2011) EFFECT OF MOISTURE CONTENT ON SOME PHYSICAL PROPERTIES OF COWPEA (Vigna unguiculata). Journal of Natural Sciences, Engineering and Technology, 10 (2). pp. 133-145.
ADERINLEWO, A. A. and RAJI, A. O. and Olayanju, T.M.A. (2011) EFFECT OF VARIETY AND MOISTURE CONTENT ON AERODYNAMIC PROPERTIES OF FOUR NIGERIAN COWPEA (Vigna unguiculata) VARIETIES. Journal of Natural Sciences, Engineering and Technology, 10 (1). pp. 106-115.
AKINOSO, R. and Olayanju, T.M.A. and HASSAN, L.O. and AJIBOSHIN, I.O. (2010) DESIGN, CONSTRUCTION AND PRELIMINARY TESTING OF A BENISEED ( Sesamum indicum ) AIR-SCREEN CLEANER. Journal of Natural Sciences, Engineering and Technology, 9 (2). pp. 141-148. ISSN 2277 - 0593
ASIRU, W. B. and IGBEKA, J. C. and Olayanju, T.M.A. (2011) ENERGY EXPENDITURE IN GARI PROCESSING ACTIVITIES BY NIGERIAN WOMEN. J. Nat. Sci. Engr. Tech., 9 (2). pp. 149-157.
Abdulrahman, K. O. and Adediran, A.A and Abraham, A. and Abdulkareem, S. and Olawale, I. M. and Yahaya, S. A. (2018) MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF FAILED COUPLING WITH AN AIRLOCK IN A FLOUR MILL. International Journal of Mechanical Engineering and Technology (IJMET), 9. pp. 795-802. (In Press)
Aboyeji, C.M and Dahunsi, S. O. and Olaniyan, Deborah Oluwatosin and Dunsin, O and Adekiya, A.O and Olayanju, T.M.A. (2021) Performance and quality attributes of okra (Abelmoschus esculentus (L.) Moench) fruits grown under soil applied Zn-fertilizer, green biomass and poultry manure. Scientific Reports, 11 (1). ISSN 2045-2322
Adedeji, A. E. and Olalusi, A. P. and Olayanju, T.M.A. and Erinle, Oluwakemi Christianah (2020) Effect of Drying Parameters on the Physical Properties of Extruded Fish Feed. IOP Conf. Series: Earth and Environmental Science, 445. pp. 1-9.
Adediran, A.A (2015) An Algorithm of a Convectional Factory Electric Tray Dryer. The International Journal Of Engineering And Science (IJES), 4 (6). pp. 17-25. ISSN 2319 – 1813
Adediran, A.A (2016) Corrosion Inhibition of Mild Steel in Seawater using Jatropha Stem. “EFTIMIE MURGU” REŞIŢA, XXIII (1). pp. 228-238. ISSN ISSN 1453 - 7397
Adediran, A.A DESIGN OF A LABORATORY POLYURETHANE FOAM RECYCLING MACHINE. Journal for Technology of Plasticity, 42 (2). pp. 47-57.
Adediran, A.A (2015) Design Concepts Towards Electric Powered Gari Frying Machine. International Journal of Scientific & Engineering Research, 6 (5). pp. 1043-1050. ISSN 2229-5518
Adediran, A.A Design and development of an improved palm kernel shelling and sorting machine. European International Journal of Science and Technology, 4 (2). pp. 225-240. ISSN 2304-9693
Adediran, A.A (2016) Development of a WormCAD using Parametric Design Approach. "EFTIMIE MURGU” REŞIŢA, XXIII (1). pp. 11-22. ISSN 1453 - 7397
Adediran, A.A Evaluation of the mechanical properties and corrosion behaviour of coconut shell ash reinforced aluminium (6063) alloy composites. Leonardo Electronic Journal of Practices and Technologies, 14 (26). pp. 107-119. ISSN 1583-1078
Adediran, A.A (2015) Mechanical properties of dual phase steel quenched in bitumen medium. Leonardo Electronic Journal of Practices and Technologies, 14 (26). pp. 1-6. ISSN ISSN 1583-1078
Adediran, A.A and ARIBO, Sunday and AMUDA, Muhammed Olalekan Hakeem (2015) Mechanical properties of dual phase steel quenched in bitumen medium. Leonardo Electronic Journal of Practices and Technologies, 26. pp. 1-16. ISSN 1583-1078
Adediran, A.A and Akinwande, Abayomi and Balogun, Ayokunle O. and Adesina, O. S. and Olayanju, T.M.A. (2021) EXPERIMENTAL STUDY ON THE MECHANICAL BEHAVIOUR OF FIRED SAND-CLAY AND GLASS POWDER-CLAYBRICKS. Acta Metallurgica Slovaca, 27 (1). pp. 4-10.
Adediran, A.A and Alaneme, Kenneth Kanayo and Oladele, Isiaka Oluwole and Akinlabi, Esther Titilayo (2018) Processing and structural characterization of Si-based carbothermal derivatives of rice husk. Cogent Engineering, 5.
Adediran, A.A and Atoyebi, O. D. and Adisa, C.O. (2018) Physical and Mechanical Properties Evaluation of Particle Board Produced From Saw Dust and Plastic Waste. International Journal of Engineering Research in Africa, 40. pp. 1-8.
Adediran, A.A and Balogun, Ayokunle O. and Akinwande, Abayomi and Mwema, Fredrick M. and Adesina, O. S. and Olayanju, T.M.A. (2021) Effect of Surface Modification on the Properties of Polypropylene Matrix Reinforced with Coir Fibre and Yam Peel Particulate. The Scientific World Journal. ISSN 8891563
Adediran, A.A and Oki, Makanjuola and Akintola, Sarah Abidemi and OGUNSEMI, B.T. and Akinlabi, Esther Titilayo (2019) ELECTRON-OPTICAL AND AUGER ELECTRON SPECTROSCOPY STUDIES OF A ZIRCONIUM CONVERSION COATING ON ALUMINIUM. Materials and technology, 53 (2). pp. 183-188. ISSN 1580-2949
Adediran, Adeolu A. and Akinwande, Abayomi A. and Balogun, Oluwatosin A. and Adesina, Olanrewaju S. and Aliyu, Samuel J. and Erinle, Tunji J. and Nyika, Joan and Olayanju, Adeniyi (2021) Selected properties of waste wig, eggshell and waste paper hybrid composites as potential material for wall partitioning. Materials Today: Proceedings, 44. pp. 2828-2836. ISSN 22147853
Adejumo, A.O.D and Adebayo, G.G and Komolafe, C.A Solid and Microbiological Quality Assesment of Gari within Ibadan Metropolis. Journal of Scientific Research & Reports.
Adejumo, A.O.D and Ajav, A.E. and IGBEKA, J. C. and Komolafe, C.A Design and Fabrication of an Okra Threshing Machine. Elixir International Journa.
Adejumo, A.O.D and Ilori, T.A. and Komolafe, C.A Biodiesel production from Okra (Abelmoschus Esculentus (l) Moench) plant. IOP Conf. Series: Earth and environmental Science, 445.
Adejumo, A.O.D and Okunola, Abiodun A. and Komolafe, C.A (2015) Performance Characteristics of a Stationary Impact Decorticator on Jatropha Seed. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2 (5). pp. 1226-1231. ISSN 3159-0040
Adekanye, T. A. (2014) ASSESSMENT OF MECHANIZATION PROBLEMS OF PEASANT FARMERS IN IREPODUN LOCAL GOVERNMENT AREA, KWARA STATE OF NIGERIA. Advances in Agriculture, Sciences and Engineering Research, 4 (6). pp. 1665-1672. ISSN 2276 – 6723
Adekanye, T. A. (2014) EVALUATION OF SOME ENGINEERING PROPERTIES OF WATERMELON SEED RELEVANT TO THE DESIGN OF PROCESSING EQUIPMENT. Advances in Agriculture, Sciences and Engineering Research, 4 (7). pp. 1667-1686. ISSN 2276 – 6723
Adekanye, T. A. and Adegbenro, V.O. and Saliu, K.R. (2016) Small-scale Maize dryer. Scientia Agriculturae, 14 (1). pp. 172-178. ISSN 2311-0228
Adekanye, T. A. and Adelakun, O.J. (2017) Evaluation of a portable watermelon juice extracting machine. Agricultural Engineering International: CIGR Journal, 19 (4). pp. 219-223.
Adekanye, T. A. and Akande, A.M. (2015) Manual Multi - crop Planter for Peasant Farmers. Elixir Agriculture, 86 (1). pp. 3905-35101. ISSN 35095-35101
Adekanye, T. A. and Akande, Avoyunafa Mary (2015) Development and Evaluation of a Manual Multi - crop Planter for Peasant Farmers. Elixir Agriculture. pp. 35095-35101.
Adekanye, T. A. and Alhassan, Elijah A. and Okunola, Abiodun A. and Akande, I. (2019) LOCUST BEANS SEED DEHULLING MACHINE. International Journal of Mechanical Engineering and Technology, 10 (3). pp. 426-436. ISSN 0976-6340
Adekanye, T. A. and Babaremu, Kunle and Okunola, Abiodun A. (2019) Evaluation of an active evaporative cooling device for storage of fruits and vegetables. Agricultural Engineering International: CIGR Journal, 21 (1). pp. 203-208.
Adekanye, T. A. and OLAOYE, JOSHUA OLANREWAJU (2013) Performance evaluation of motorized and treadle cowpea threshers. Agric Eng Int: CIGR Journal, 15 (4). pp. 300-306.
Adekanye, T. A. and Oni, K.C. and Alhassan, Elijah A. and Adekiya, A.O (2020) Crop Energy analysis. CIGR, 22 (2). pp. 98-104.
Adekanye, T. A. and Osakpamwan, A.B. and Osaivbie, I.E. (2016) Evaluation of a soybean threshing machine for small scale farmers. Agricultural Engineering International: CIGR Journal, 18 (2). pp. 426-434.
Adekanye, T. A. and Saleh, A. and Alhassan, Elijah A. and ILIYAH, A and FEJURO, E (2019) SOLAR-POWERED EVAPORATIVE COOLING SYSTEM. Nigerian Journal of Scientific Research, 19 (1). pp. 1-10. ISSN 0794-0319
Adekanye, T. A. and Saleh, A. and Moses, Olumuyiwa Fish drying. Nigerian Journal of Scientific Research, 20 (3). pp. 281-288. ISSN 0794-0319
Adekanye, T. A. and Saleh, A. and Okunola, Abiodun A. and Osavbie, Idahosa and Jegede, K. (2020) Energy efficiency for poultry production. : Earth and Environmental Science, 445. ISSN 012003
Adekiya, A.O and Aremu, C. O. and Agbede, T.M and Olayanju, T.M.A. and Ejue, Wutem S. and Adegbite, K. A. and Olayiwola, Ibukun Elizabeth and Ajiboye, B. O. and Oni, Ayodele Tunmise (2021) Soil productivity improvement under different fallow types on Alfisol of a derived savanna ecology of Nigeria. Heliyon, 7. e06759. ISSN 2405-8440
Adekunle, A. S. and Adeleke, A.A. and Sam Obu, C. V. and Ikubanni, P.P. and Ibitoye, S. E. and Azeez, T. M. (2020) Recycling of plastics with compatibilizer as raw materials for the production of automobile bumper. Cogent Engineering, 7 (1). pp. 1-14.
Adekunle, A.A and Ikubanni, P.P. and Agboola, O.O. (2018) An Expert System for Automobile Repairs and Maintenance. Mindanao Journal of Science and Technology, 16. pp. 41-56.
Adekunle, A.A and Ikubanni, P.P. and Martins, O.O. (2018) Development of computer aided design software for piston movement. International Journal of Mechanical Engineering and Technology, 9 (10). pp. 775-783.
Adekunle, Adebayo and gbadamosi, T. A. and Nwosu, F. O. and Odusote, Jamiu and Omoniyi, Peter and Adekunle, Akanni A. and Popoola, Tajudeen and Adebiyi, Kazeem (2020) Cooling potential of formulated bio-quenchant oils on cast Aluminium alloy material. Journal of Chemical Technology and Metallurgy,, 55 (5). pp. 1140-1149.
Adeleke, A.A. and Ikubanni, P.P. and Orhadahwe, T. A. and Christopher, C.T and Akano, J.M and Agboola, O.O. and Adegoke, Kayode Adesina and Balogun, Ayokunle O. and IBIKUNLE, R.A. Sustainability of multifaceted usage of biomass: A review. Heliyon.
Adeleke, A.A. and Odusote, J.K. and Ikubanni, P.P. and Lasode, O. A. and Malathi, M. and Paswan, D. (2020) Essential basics on biomass torrefaction, densificationand utilization. International Journal of Energy Research. pp. 1-12.
Adeleke, A.A. and Odusote, J.K. and Ikubanni, P.P. and Lasode, O. A. and Malathi, M. and Paswan, D. (2020) The ignitability, fuel ratio and ash fusion temperatures of torrefied woody biomass. Heliyon, 6. pp. 1-7.
Adeleke, A.A. and Odusote, J.K. and Ikubanni, P.P. and Lasode, O.A. L and Agboola, O.O. and Ammasi, A. and Ajao, K.R. (2018) Dataset on the evaluation of chemical and mechanical properties of steel rods from local steel plants and collapsed building sites. Data in Brief, 21. pp. 1552-1557.
Adeleke, A.A. and Odusote, J.K. and Ikubanni, P.P. and Orhadahwe, T. A. and Lasode, O. A. and Ammasi, A. and Kumar, K. Ash analyses of bio‑coal briquettes produced using blended binder. Scientific Reports, 11.
Adeleke, A.A. and Odusote, J.K. and Lasode, O. A. and Ikubanni, P.P. and Madhurai, M. and Paswan, D. (2019) Evaluation of thermal decomposition characteristics and kinetic parameters of melina wood. Biofuels Journals. ISSN 1759-7269 (Print) 1759-7277 (Online
Adeleke, A.A. and Odusote, J.K. and Lasode, O. A. and Ikubanni, P.P. and Malathi, M. and Paswan, D. (2019) Densification of coal fines and mildly torrefied biomass into composite fuel using different organic binders. Heliyon, 5. ISSN 2405-8440
Adeniyi, V. A. and Matanmi, B. M. and Ajiboye, B. O. and Kolawole, A. E. and AJALA, A.O and Owolabi, A. O. (2019) TECHNOLOGICAL TRAINING NEEDS OFSMALL SCALEOIL-PALMPROCESSORSINNIGERIA. International Journal of Mechanical Engineering and Technology (IJMET), 10 (2). pp. 1546-1557. ISSN 0976-6340; 0976-6359
Adesina, O. S. and Oki, Makanjuola and Farotade, G. A. and Adesina, O. T. and Ogunbiyi, O. F. and Adeleke, A.A. (2020) Effect of nickel-based laser coatings on phase composition and corrosion behaviour of titanium alloy for offshore application. Materias tiday Proceedings.
Adewumi, Adejoke D. and Ojediran, J. O. and Oladele, S.O and Olumuyiwa, M. and Okonkwo, Clinton E. and Olayanju, T.M.A. (2021) Energy Requisite and Drying Capacity of a Superheated Steam Dryer. IOP Conference Series: Materials Science and Engineering, 1107 (1). 012045. ISSN 1757-8981
Adeyemi, O. S. and UNSPECIFIED (2020) Comparative evaluation of the antioxidant capacity of ferulic acid and synthesized propionyl ferulate. Journal of Applied Pharmaceutical Science, 10 (5). pp. 97-103. ISSN 22313354
Agbeboh, N.I. and Oladele, O.I. and Daramola, O. O. and Adediran, A.A and Olasukanmi, O.O. and Tanimola, M.O. (2020) Environmentally sustainable processes for the synthesis of hydroxyapatite. Heliyon, 6. ISSN e03765
Agboola, O.O. APPLICATION OF STATISTICAL QUALITY CONTROL (SQC) IN THE CALIBRATION OF OIL STORAGE TANKS. Journal of Production Engineering.
Agboola, O.O. DESIGN AND DEVELOPMENT OF AN UNMANNED SURVEILLANCE AERIAL VEHICLE (USAV) USING LOCALLY SOURCED MATERIAL. ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering.
Agboola, O.O. DEVELOPMENT AND PERFORMANCE EVALUATION OF AN ECONOMIC SOLAR GRAIN DRYER. International Journal of Mechanical Engineering and Technology.
Agboola, O.O. Dataset for the development of a diagnostic schedule for a defective LC-195V5 CNC milling machine at FUTA central workshop. Data in Brief.
Agboola, O.O. Dataset on the evaluation of chemical and mechanical properties of steel rods from local steel plants and collapsed building sites. Data in Brief.
Agboola, O.O. Development of a diagnostic schedule for a defective LC-195V5 CNC milling machine using PERT. Leonardo Electronic Journal of Practices and Technologies.
Agboola, O.O. Effect of stand‑off height on the shear strength of ball grid array solder joints under varying pad sizes. SN Applied Sciences.
Agboola, O.O. Physico-Mechanical Properties of Particle boards Produced from Locally Sourced Materials. International Journal of Engineering Research in Africa.
Agboola, O.O. TENSILE STRENGTH AND MICROSTRUCTURAL BEHAVIOUR OF MEDIUM CARBON STEEL QUENCHED IN SOME SELECTED MEDIA. International Journal of Civil Engineering and Technology (IJCIET).
Agboola, O.O. and Ikubanni, P.P. (2017) APPLICATION OF STATISTICAL QUALITY CONTROL (SQC) IN THE CALIBRATION OF OIL STORAGE TANKS. Journal of Production Engineering, 20 (1). pp. 127-132.
Agboola, O.O. and Ikubanni, P.P. (2017) APPLICATION OF STATISTICAL QUALITY CONTROL (SQC) IN THE CALIBRATION OF OIL STORAGE TANKS. Journal of Production Engineering, 20 (1). pp. 127-132.
Agboola, O.O. and Ikubanni, P.P. (2017) APPLICATION OF STATISTICAL QUALITY CONTROL (SQC) IN THE CALIBRATION OF OIL STORAGE TANKS. Journal of Production Engineering, 20 (1). pp. 127-132.
Agboola, O.O. and Ikubanni, P.P. and Adediran, A.A and IBIKUNLE, R.A. and OGUNSEMI, B.T. (2016) DEVELOPMENT OF WORMCAD USING PARAMETRIC DESIGN APPROACH. ANALELE UNIVERSITATII "EFTIMIE MURGU" RESITA, 23 (1). pp. 11-22. ISSN 1453-7397
Agboola, O.O. and Ikubanni, P.P. and Adediran, A.A and IBIKUNLE, R.A. and OGUNSEMI, B.T. (2016) Development of a WormCAD using Parametric Design Approach. ANALELE UNIVERSITĂŢII “EFTIMIE MURGU” REŞIŢA, 23 (1). pp. 11-22. ISSN ISSN 1453 - 7397
Agboola, O.O. and Ikubanni, P.P. and Adediran, A.A and IBIKUNLE, R.A. and OGUNSEMI, B.T. (2016) Development of a WormCAD using Parametric Design Approach. UEM, 23 (1). pp. 11-22. ISSN ISSN 1453 - 7397
Agboola, O.O. and Ikubanni, P.P. and Adediran, A.A and IBIKUNLE, R.A. and OGUNSEMI, B.T. (2016) Development of a WormCAD using Parametric Design Approach. ANALELE UNIVERSITĂŢII “EFTIMIE MURGU” REŞIŢA, XXIII. pp. 11-22. ISSN 1453 - 7397
Agboola, O.O. and Ikubanni, P.P. and Adeleke, A.A. and Adediran, A.A and Adesina, O. S. and Aliyu, S.J (2020) Optimization of heat treatment parameters of medium carbon steel quenched in different media using Taguchi method and grey relational analysis. Heliyon, 6. ISSN 04444
Agboola, O.O. and Ikubanni, P.P. and Adeleke, A.A. and Adediran, A.A. and Adesina, O.S. and Aliyu, S.J. and Olabamiji, T.S. (2020) Optimization of heat treatment parameters of medium carbon steel quenched in different media using Taguchi method and grey relational analysis. Heliyon, 6 (7). e04444. ISSN 24058440
Agboola, O.O. and Ikubanni, P.P. and IBIKUNLE, R.A. and Adediran, A.A and OGUNSEMI, B.T. (2017) Generation of Calibration Charts for Horizontal Petroleum Storage Tanks Using Microsoft Excel. M�APAN-Journal of Metrology Society of India.
Agboola, O.O. and Ikubanni, P.P. and IBIKUNLE, R.A. and Adediran, A.A and OGUNSEMI, B.T. (2017) Generation of Calibration Charts for Horizontal Petroleum Storage Tanks Using Microsoft Excel. M�APAN-Journal of Metrology Society of India, - (-).
Agboola, O.O. and Ikubanni, P.P. and IBIKUNLE, R.A. and Adediran, A.A and OGUNSEMI, B.T. (2017) Generation of Calibration Charts for Horizontal Petroleum Storage Tanks Using Microsoft Excel. M_APAN-Journal of Metrology Society of India.
Agboola, O.O. and Ikubanni, P.P. and OGUNSEMI, B.T. and IBIKUNLE, R.A. and Adediran, A.A and Kareem, B. (2018) Dataset for the development of a diagnostic schedule for a defective LC-195V5 CNC milling machine at FUTA central workshop. ELSEVIER. pp. 2352-3409.
Agboola, O.O. and Ikubanni, P.P. and OGUNSEMI, B.T. and IBIKUNLE, R.A. and Adediran, A.A and Kareem, B. and Akinnuli, B.O. and Osueke, C.O. (2018) Dataset for the development of a diagnostic schedule for a defective LC-195V5 CNC milling machine at FUTA central workshop. Data in Brief, 21. 1496 -1503.
Agboola, O.O. and Kareem, B. and Akinnuli, B.O. (2016) Development of a diagnostic schedule for a defective LC-195V5 CNC milling machine using PERT. Leonardo Electronic Journal of Practices and Technologies, 28. pp. 107-118. ISSN ISSN 1583-1078
Agboola, O.O. and Kareem, B. and Akinnuli, B.O. (2016) Development of a diagnostic schedule for a defective LC-195V5 CNC milling machine using PERT. Leonardo Electronic Journal of Practices and Technologies, 28. pp. 107-118. ISSN ISSN 1583-1078
Agboola, O.O. and Kareem, B. and Akinnuli, B.O. (2016) Development of a diagnostic schedule for a defective LC-195V5 CNC Milling machine using PERT. Leonardo Electronic Journal of Practices and Technologies (28). pp. 107-118. ISSN 1583-1078
Aina, Elijah Oladimeji and Adisa, Alex Folami and Olayanju, T.M.A. and Ismaila, Salami Olasunkanmi (2018) PERFORMANCE EVALUATION OF A DEVELOPED CASHEW NUT SHELL LIQUID EXPELLER. Sciendo, 22 (2). pp. 5-19. ISSN 2449-5999
Akinnuli, B.O. and AWOPETU, O.O. and Ikubanni, P.P. and Agboola, O.O. (2016) DEVELOPMENT OF PEDAL OPERATED HONEY EXTRACTOR. Bristish Journal of Applied Science and Technology, 16 (2). pp. 1-10. ISSN 2231-0843
Akinnuli, B.O. and Agboola, O.O. and Ikubanni, P.P. (2017) DESIGN AND DEVELOPMENT OF AN UNMANNED SURVEILLANCE AERIAL VEHICLE (USAV) USING LOCALLY SOURCED MATERIAL. ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering. pp. 27-32. ISSN 1584-2665
Akinnuli, B.O. and Agboola, O.O. and Ikubanni, P.P. (2017) DESIGN AND DEVELOPMENT OF AN UNMANNED SURVEILLANCE AERIAL VEHICLE (USAV) USING LOCALLY SOURCED MATERIAL. ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, 15 (3). pp. 27-32. ISSN ISSN: 1584-2665
Akinnuli, B.O. and Agboola, O.O. and Ikubanni, P.P. (2017) DESIGN AND DEVELOPMENT OF AN UNMANNED SURVEILLANCE AERIAL VEHICLE (USAV) USING LOCALLY SOURCED MATERIAL. ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, 15 (3). pp. 27-32.
Akinnuli, B.O. and Agboola, O.O. and Ikubanni, P.P. Design and Development of an Unmanned Surveillance Aerial Vehicle (USAV) Using Locally Sourced Materials. ANALELE UNIVERSITĂŢII “EFTIMIE MURGU” REŞIŢA, 24 (1). pp. 18-32. ISSN ISSN 1453 - 7397
Akinnuli, B.O. and Agboola, O.O. and Ikubanni, P.P. (2017) Design and Development of an Unmanned Surveillance Aerial Vehicle (USAV) Using Locally Sourced Materials. UEM, 24 (1). pp. 18-32. ISSN ISSN 1453 - 7397
Akinnuli, B.O. and Agboola, O.O. and Ikubanni, P.P. (2015) PARAMETERS DETERMINATION USING COMPUTER AIDED DESIGN FOR BEVEL GEARS (CAD). British Journal of Mathematics and Computer Science, 9 (6). pp. 537-558. ISSN 2231-0851
Akinnuli, B.O. and Agboola, O.O. and Ikubanni, P.P. (2015) Parameters Determination for the Bevel Gears Using Computer Aided Design (Bevel CAD). British Journal of Mathematics and Computer Science, 9 (6). pp. 537-558. ISSN 2231-0851
Akinnuli, B.O. and Agboola, O.O. and Ikubanni, P.P. (2015) Parameters Determination for the Design of Bevel Gears Using Computer Aided Design (Bevel CAD). British Journal of Mathematics & Computer Science, 9 (6). pp. 537-558. ISSN ISSN: 2231-0851
Akinnuli, B.O. and Agboola, O.O. and Ikubanni, P.P. (2015) Parameters Determination for the Design of Bevel Gears Using Computer Aided Design (Bevel CAD). British Journal of Mathematics & Computer Science, 9 (6). pp. 537-558. ISSN 2231-0851
Akinnuli, B.O. and Awopetu, O. O. and Ikubanni, P.P. and Agboola, O.O. (2016) Development of Pedal Operated Honey Extractor. British Journal of Applied Science & Technology, 16 (2). pp. 1-10. ISSN ISSN: 2231-0843
Akinnuli, B.O. and Awopetu, O. O. and Ikubanni, P.P. and Agboola, O.O. (2016) Development of Pedal Operated Honey Extractor. British Journal of Applied Science & Technology, 16 (2). pp. 1-10. ISSN ISSN: 2231-0843
Akinnuli, B.O. and Awopetu, O.O. and Ikubanni, P.P. and Agboola, O.O. (2016) Development of Pedal Operated Honey Extractor. British Journal of Aplied Science and Technology, 16 (2). pp. 1-10. ISSN 2231-0843
Akinnuli, B.O. and Olabamiji, T.S. and IBIKUNLE, R.A. (2019) Development of Broken Building Blocks Pulverizer for Recycling Process and Waste Control In Blocks Moulding Industries. East African Scholars Journal of Engineering and Computer Sciences, 2 (1).
Akinnuli, B.O. and Osueke, C.O. and Ikubanni, P.P. and Agboola, O.O. and Adediran, A.A (2015) DESIGN CONCEPTS TOWARDS ELECTRIC POWERED GARI FRYING MACHINE. International Journal of Scientific and Engineering Research, 6 (5). pp. 1043-1050. ISSN 2229-5518
Akinnuli, B.O. and Osueke, C.O. and Ikubanni, P.P. and Agboola, O.O. and Adediran, A.A (2015) Design Concepts Towards Electric Powered Gari Frying Machine. International Journal of Scientific and Engineering Research, 6 (5). pp. 1043-1050. ISSN 2229-5518
Akinnuli, B.O. and Osueke, C.O. and Ikubanni, P.P. and Agboola, O.O. and Adediran, A.A (2015) Design Concepts Towards Electric Powered Gari Frying Machine. International Journal of Scientific & Engineering Research, 6 (5). pp. 1043-1050. ISSN ISSN 2229-5518
Akinnuli, B.O. and Osueke, C.O. and Ikubanni, S.O. and Agboola, O.O. and Adediran, A.A (2015) Design Concepts Towards Electric Powered Gari Frying Machine. International Journal of Scientific & Engineering Research, 6 (5). pp. 1043-1050.
Akinoso, R. and Aboaba, S. A. and Olayanju, T.M.A. (2010) EFFECTS OF MOISTURE CONTENT AND HEAT TREATMENT ON PEROXIDE VALUE AND OXIDATIVE STABILITY OF UN-REFINED SESAME OIL. African Jornal of Food Agriculture, Nutrition and Development, 10 (10). ISSN 1684 5374
Akinoso, R. and Igbeka, J. C. and Olayanju, T.M.A. and Bankole, L. K. (2006) Modeling of Oil Expression from Palm Kernel ( Elaeis guineensis Jacq.). Agricultural Engineering International: the CIGR Ejournal. Manuscript FP 05 016., 8. pp. 1-8.
Akinoso, R. and Olayanju, T.M.A. (2010) Design, fabrication and preliminary testing of oil expeller for sesame seed. Journal of Applied Science, Engineering and Technology, 10. ISSN 1596-3233
Akinoso, R. I. and Igbeka, Joseph C. and Olayanju, T.M.A. (2006) Process Optimization of Oil Expression from Sesame Seed (Sesamum indicum Linn.). Agricultural Engineering International: the CIGR Ejournal. Manuscript FP 06 011., 8. pp. 1-7.
Akinoso, Rahman and Olayanju, T.M.A. and Idehai, John Ohioma and Igbeka, Joe (2008) The Effects of Varieties and Moisture Content on Some Physical and Aerodynamic Properties of Sesame Seeds (Sesamum indicum L) as Related to Cleaning. International Journal of Food Engineering, 4 (8). pp. 1-10.
Akinoso, Rahmon and Olayanju, T.M.A. and Bankole, L.M. (2008) Design, fabrication and testing of a roaster for palm (Elaeis guineensis) kernel. Journal of Food Science and Technology -Mysore, 45 (1). pp. 92-93.
Akinwade, A. A. and Adediran, A.A and Balogun, Ayokunle O. and Abel, B.A. and Daniel, T.P. and Kazeem, R.A. and Olayanju, T.M.A. (2021) Study of the Effects of Waste Glass Additives on the Properties and Compliance level of Fired Ceramic Masonry Bricks. IOP Conference Series: Materials Science and Engineering, 1107 (1). 012053. ISSN 1757-8981
Alhassan, Elijah A. and Adewumi, Adejoke D. and OKPODJAH, Bernard Development of a self-propelled multi-crop two rows precision planter: A new design concept for the metering mechanism. International Journal of Mechanical Engineering and Technology.
Alhassan, Elijah A. and Ijabo, O.J. and Afolabi, E.O. (2018) DEVELOPMENT OF CASSAVA PEELING MACHINE USING AN ABRASIVE MECHANISM. Journal of Production Engineering, 21 (1). pp. 61-66.
Alhassan, Elijah A. and Olaoye, J. O. and Olayanju, T.M.A. and Okonkwo, Clinton E. (2019) An investigation into some crop residues generation from farming activities and inherent energy potentials in Kwara State, Nigeria. Materials Science and Engineering, 640. pp. 1-10.
Alhassan, Elijah A. and Olaoye, Joshua Olarenwaju and Adekanye, T. A. and Okonkwo, Clinton E. Energy potentials of wood residues. Nature Environment and Pollution Technology, 18 (3). pp. 1-5. ISSN 0972-6268
Aliyu, S. J. and Kucha, E. L. and Ibrahim, S. J. (2021) Modelling and simulation of a Single Cyclone for Optimal Efficiency for a Batch-Type Fixed-Bed Down-Draft Gasifier using CFD. IOP Conference Series: Materials Science and Engineering, 1107 (1). 012038. ISSN 1757-8981
Atoyebi, O. D. and Osueke, C.O. and Badiru, S. and Gana, A. J. and Ikpotokin, I. and Modupe, A. E. and Tegene, G. A. (2019) EVALUATION OF PARTICLE BOARD FROM SUGARCANE BAGASSE AND CORN COB. International Journal of Mechanical Engineering and Technology (IJMET), 10 (1). pp. 1193-1200. ISSN 0976-6340; 0976-6359
Awogbemi, O and Komolafe, C.A (2011) Potential for Sustainable Renewable Energy Development in Nigeria. The Pacific Journal of Science and Technology, 12 (1). pp. 161-169.
Awogbemi, O. and Komolafe, C.A TOWARDS BIOGAS UTILIZATION IN A DEPRESSED ECONOMY. AIJCSR.
Awogbemi, O. and OLUWALEYE, I.O and Komolafe, C.A A Survey Of Solar Energy Utilization For Sustainable Development In Nigeria. Journal of Multidisciplinary Engineering Science and Technology.
Balogun, Ayokunle O. and Adediran, A.A and Akinwande, Abayomi and Olayanju, T.M.A. (2021) Application of Digital Logic Method in the Selection of Suitable Polymeric Materials for Ceiling Tiles Production. IOP Conference Series: Materials Science and Engineering, 1107 (1). 012186. ISSN 1757-8981
Balogun, Ayokunle O. and Lasode, O.A. L and McDonald, A.G. (2014) Devolatilisation kinetics and pyrolytic analyses of Tectona grandis (teak). Bioresource Technology.
Balogun, Ayokunle O. and Lasode, Olumuyiwa and Li, Hui and McDonald, Armando Fourier Transform Infrared (FTIR) Study and Thermal Decomposition Kinetics of Sorghum bicolour Glume and Albizia pedicellaris Residues. Waste and Biomass Valorization.
Balogun, Ayokunle O. and McDonald, Armando G (2015) Decomposition kinetic study, spectroscopic and pyrolytic analyses of Isoberlinia doka and Pinus ponderosa. Biomass Conversion and Biorefinery. ISSN 2190-6815
Balogun, Oluwatosin and Akinwande, Abayomi and Adediran, A.A and Ikubanni, P.P. and Samuel, Shittu and Adesina, O. S. (2021) Experimental Study on the Properties of Fired Sand–Clay Ceramic Products for Masonry Applications. Journal of Materials in Civil Engineering, 33 (2).
Bolaji, B. O. and Akintaro, A. O. and ALAMU, O. J. and Olayanju, T.M.A. (2012) Design and performance evaluation of a cooler refrigerating system working with ozone friendly refrigerant. The Open Thermodynamics Journal, 6. pp. 25-32. ISSN 1874-396X/12
DAIRO, O. U. and Olayanju, T.M.A. and AJISEGIRI, E. S. A. and ALAMU, O. J. and Adeleke, Ademola E. (2013) Optimization of in-situ Biodiesel Production from Raw Castor Oil-Bean Seed. Journal of Energy Technologies and Policy, 3 (13). ISSN 2224-3232 (Paper) 2225-0573 (Online
DAIRO, O. U. and Olayanju, T.M.A. and AJISEGIRI, E. S. A. and AWONORIN, S. O. and ALAMU, O. J. (2011) EFFECT OF TEMPERATURE AND PERCENTAGE OF INITIAL CATALYST ON THE IN-SITU PRODUCTION OF BIO-DIESEL FROM CASTOR OIL BEAN SEED USING RESPONSE SURFACE METHODOLOGY. Journal of Natural Sciences, Engineering and Technology, 10 (1). pp. 163-177.
DARAMOLA, Oluyemi Ojo and Adediran, A.A and ADEWUYI1, Benjamin Omotayo and ADEWOLE, Olamigoke (2017) Mechanical properties and water absorption behaviour of treated pineapple leaf fibre reinforced polyester matrix composites... Leonardo Journal of Sciences, 30. pp. 15-30. ISSN 1583-0233
DARAMOLA, Oluyemi Ojo and Adediran, A.A and FADUMIYE, Ayodele Tolu (2015) Evaluation of the mechanical properties and corrosion behaviour of coconut shell ash reinforced aluminium (6063) alloy composites. Leonardo Electronic Journal of Practices and Technologies, 27. pp. 107-119. ISSN 1583-1078
Dairo, Olawale U. and Olayanju, T.M.A. and Adeoye, Ademola A. and Adeleke, Ademola E. and Adeosun, Olayemi J. and Iyerimah, Rita B. (2017) Development of an Anaerobic Digester for Animal Waste. FUOYE Journal of Engineering and Technology, 2 (2). pp. 17-22. ISSN 2579-0625
Daramola, O. O. and Adediran, A.A and Adegun, M. H. and Sadiku, E. R. and Olayanju, T.M.A. (2018) EFFECT OF GUINEA CORN HUSK ASH ON THE MECHANICAL PROPERTIES AND WEAR BEHAVIOUR OF EPOXY MATRIX COMPOSITES. International Journal of Civil Engineering and Technology (IJCIET), 9 (11). pp. 1207-1216. ISSN 0976-6316
Daramola, O.O and Adediran, A.A and Oladele,, I.O. and Babarinsa, S.O (2017) DESIGN OF A LABORATORY POLYURETHANE FOAM RECYCLING MACHINE. Journal for Technology of Plasticity, 42 (2). pp. 47-57.
Daramola, O.O and Oladele, I.O. and Adediran, A.A and Babarinsa, S.O (2017) DESIGN OF A LABORATORY POLYURETHANE FOAM RECYCLING MACHINE. Journal for Technology of Plasticity, 42 (2).
Diarah, R. S. and Oyetunji, Samson A. and Osueke, C.O. and Onokwai, A. O (2019) Dataset on cellular and geo-spatial information of a 10 km distance along Akure-Ilesha road. Data in Brief, 22. pp. 530-536. ISSN 2352-3409
Ebenezer, Afolabi Ayodeji and Aramide, Fatai Olufemi and Adediran, A.A and Popoola, Abimbola Patricia (2021) MECHANICAL PROPERTIES AND PHASE EVOLUTIONS IN HEAT-TREATED CAST Al-SiC-TiO2 METAL MATRIX COMPOSITES. Journal of Materials in Civil Engineering, 56 (1). pp. 235-246. ISSN 19435533, 08991561
Edeoja, A.O and Aliyu, S.J and Ameh, J.A (2015) Investigation of the suitability of a flat plate collector in a multi-effect humidification (MEH) system in Makurdi. Investigation of the suitability of a flat plate collector in a multi-effect humidification (MEH) system in Makurdi, 1 (8). pp. 677-682. ISSN 2394 -7500
Edeoja, A.O and Aliyu, S.J and Ameh, J.A (2015) Small Scale Performance Evaluation Of A Multi-Effect Humidification-Dehumidification System In Makurdi. Small Scale Performance Evaluation Of A Multi-Effect Humidification-Dehumidification System In Makurdi, 4 (7). pp. 41-51. ISSN 2320 - 0847
Edoziuno, F.O. and Adediran, A.A and Odoni, B.U. and Utu, Ochuko Goodluck and Olayanju, T.M.A. (2021) Physico-chemical and morphological evaluation of palm kernel shell particulate reinforced aluminium matrix composites. Materials Today proceedings, 38 (2). pp. 652-657.
Erinle, Oluwakemi Christianah and Olalusi, A. P. and Olayanju, T.M.A. and Okunola, Abiodun A. and Ajao, Faith Olusola (2020) Some engineering properties and nutrient composition of selected pelletized fish feed in Nigeria. IOP Conf. Series: Earth and Environmental Science, 445. pp. 1-8.
Eze, Sunday C. and Chinedu-Eze, Vera C. and Bello, Adenike O. and Adegun, Adekanmi and ALAO, Esther Monisola (2019) CHALLENGES FACING SMES IN EMERGING ICT ADOPTION FROM DIVERSE ACTORS’ PERSPECTIVE: A DATA DRIVEN APPROACH. International Journal of Mechanical Engineering and Technology (IJMET), 10 (2). pp. 636-651. ISSN 0976-6340; 0976-6359
Ezugwu, C. A and Okonkwo, Ugochukwu C. and Sinebe, J.E. and Okokpujie, I.P. (2016) Stability Analysis of Model Regenerative Chatter of Milling Process Using First Order Least Square Full Discretization Method. International Journal of Mechanics and Applications, 6 (3). pp. 49-62.
Ezugwu, C. A and Osueke, C.O. and Onokwai, A. O and Uguru-Okorie, D.C and Ikpotokin, I. and IBIKUNLE, R.A. (2018) Modeling of Regenerative Chatter of a Milling Process to Delineate Stable Cutting Region from Unstable Region. International Journal of Mechanical Engineering and Technology, 9 (11). pp. 748-757.
Falaye, Adebanjo Joseph and Ahmed, B O and Ajiboye, B. O. Effects Of Global Economic And Financial Reforms On Developing Economies: A Reassessment. Effects Of Global Economic And Financial Reforms On Developing Economies: A Reassessment.
Fatoba, O. S. and Adesina, O. S. and Farotade, G. A. and Adediran, A.A Modelling and Optimization of Laser Alloyed AISI 422 Stainless Steel Using Taguchi Approach and Response Surface Model (RSM). Current Journal of Applied Science and Technology, 23 (3). pp. 1-16. ISSN 2231-0843
IBIKUNLE, R.A. Exploration and prediction of wet season municipal solid waste for power generation in Ilorin metropolis, Nigeria. Journal of Material Cycles and Waste Management.
IBIKUNLE, R.A. Investigating municipal solid waste generation and management in Ilorin for possible integrated waste‑management system. Journal of Material Cycles and Waste Management.
IBIKUNLE, R.A. and Akintunde, Mutalubi Aremu and Titiladunayo, I.F. and Adeleke, A.A. Estimation of coefficient of performance of thermoelectric cooler using a 30 W single-stage type. International Review of Applied Sciences and Engineering.
IBIKUNLE, R.A. and Ikubanni, P.P. and Agboola, O.O. and OGUNSEMI, B.T. (2018) Development and performance evaluation of palm nut cracker. Leonardo Electronic Journal of Practices and Technologies (33). pp. 219-234. ISSN 1583-1078
IBIKUNLE, R.A. and Lukman, A. F. and Titiladunayo, I.F. and Akeju, Emmanuel Modeling and robust prediction of high heating values of municipal solid waste based on ultimate analysis. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.
IBIKUNLE, R.A. and Lukman, A. F. and Titiladunayo, I.F. and Haadi, A. Modeling energy content of municipal solid waste based on proximate analysis: R-k class estimator approach. Cogent Engineering.
IBIKUNLE, R.A. and Titiladunayo, I.F. and Akinnuli, B.O. Development of a Software System for Selecting Steam Power Plant to Convert Municipal Solid Waste to Energy. MDPI.
IBIKUNLE, R.A. and Titiladunayo, I.F. and Akinnuli, B.O. and Dahunsi, S. O. and Olayanju, T.M.A. (2019) Estimation of power generation from municipal solid wastes: A case Study of Ilorin metropolis, Nigeria. Energy Reports. pp. 126-135.
IBIKUNLE, R.A. and Titiladunayo, I.F. and Akinnuli, B.O. and Lukman, A. F. and Ikubanni, P.P. and Agboola, O.O. (2018) Modelling the energy content of municipal solid waste and determination of its physico-chemical correlation using multiple regression analysis. International Journal of Mechanical Engineering and Technology, 9 (11). pp. 220-232.
IBIKUNLE, R.A. and Titiladunayo, I.F. and Akinnuli, B.O. and Osueke, C.O. and Dahunsi, S. O. and Olayanju, T.M.A. Impact of Physical and Chemical Properties of Municipal Solid Waste on its Electrical Power Rating Potential. Journal of Physics: Conference Series.
IBIKUNLE, R.A. and Titiladunayo, I.F. and Lukman, A. F. and Dahunsi, S. O. and Akeju, E.A Municipal solid waste sampling, quantification and seasonal characterization for power evaluation: Energy potential and statistical modelling. ELSEVIER.
IBRAHIM, J. S. and Edeoja, A.O and Aliyu, S.J (2015) A Comparative Study of Biogas Yield from Various Brewery Wastes and Their Blends with Yam Peels. A Comparative Study of Biogas Yield from Various Brewery Wastes and Their Blends with Yam Peels, 5 (11). pp. 38-46. ISSN 2224 - 3232
IBRAHIM, J. S. and IERVE, A. I. and Aliyu, S.J (2015) ENERGY ANALYSIS OF LOCAL RICE PROCESSING IN BENUE STATE, NIGERIA. Asian Academic Research Journal of Multidisciplinary, 2 (2). pp. 2319-2801.
IBRAHIM, J. S. and Iervi, A.I and Aliyu, S.J ENERGY ANALYSIS OF LOCAL RICE PROCESSING IN BENUE STATE, NIGERIA. ENERGY ANALYSIS OF LOCAL RICE PROCESSING IN BENUE STATE, NIGERIA, 2 (2). 356 -366. ISSN 2319 - 2801
Ikpotokin, I. and Osueke, C.O. (2014) Heat Transfer and Fluid Flow Characteristics Study for In-Line Tube Bank in Cross-Flow. International Journal of Mechanical & Mechatronics Engineering, 14 (3). pp. 93-105. ISSN 8282
Ikpotokin, I. and Uguru-Okorie, D.C (2017) Influence of Commercial Gasoline Samples on the Performance Characteristics of SI Engines. Journal of Research in Mechanical Engineering, 3 (3). 09-16. ISSN 2321-8185
Ikpotokin, I. and Uguru-Okorie, D.C (2017) Influence of Commercial Gasoline Samples on the Performance Characteristics of SI Engines. Journal of Research in Mechanical Engineering, 3 (3). 09-16. ISSN 2321-8185
Ikpotokin, I. and Uguru-Okorie, D.C and Dara, A.A. (2017) Intertwined Helical Tube Insertion Impact on Thermal-Hydrodynamic Characteristics Associated with Internal Flows. International Journal of Trend in Research and Development, 4 (1). pp. 256-260. ISSN 2394-9333
Ikpotokin, I. and Uguru-Okorie, D.C and Osueke, C.O. and Dare, A. A. and Petinrin, M. O. (2019) NUMERICAL INVESTIGATION OF SHELL-AND-TUBE HEAT EXCHANGER WITH PARABOLIC SEGMENTAL BAFFLE CUT. International Journal of Mechanical Engineering and Technology (IJMET), 10 (1). pp. 1221-1234. ISSN 0976-6340; 0976-6359
Ikubanni, P.P. and AKANDE, K.A. (2015) HAND INDEX CLASSIFICATIONS OF SOME SELECTED MALE IN ILORIN, NORTH CENTRAL NIGERIA. e-Journal of Science and Technology, 10 (1). pp. 65-69.
Ikubanni, P.P. and Adediran, A.A and Adeleke, A.A. and Ajao, K. R. and Agboola, O.O. (2017) Mechanical Properties Improvement Evaluation of Medium Carbon Steels Quenched in Different Media. International Journal of Engineering Research in Africa, 32. pp. 1-10. ISSN ISSN: 1663-4144
Ikubanni, P.P. and Adediran, A.A and Adeleke, A.A. and Ajao, K. R. and Agboola, O.O. (2017) Mechanical Properties Improvement Evaluation of Medium Carbon Steels Quenched in Different Media. International Journal of Engineering Research in Africa, 32. pp. 1-10. ISSN 1663-4144
Ikubanni, P.P. and Adediran, A.A and Adeleke, A.A. and Ajao, K.R. and Agboola, O.O. (2017) Mechanical Properties Improvement Evaluation of Medium Carbon Steel Quenched in Different Media. International Journal of Engineering Research in Africa, 32. pp. 1-10.
Ikubanni, P.P. and Adediran, A.A and Adeleke, A.A. and Ajao, K.R. and Agboola, O.O. (2017) nical Properties Improvement Evaluation of Medium Carbon Steel Quenched in Different Media. International Journal of Engineering Research in Africa. (In Press)
Ikubanni, P.P. and Adediran, A.A and Adeleke, Adekunle Akanni and Ajao, Kajogbola Rasaq and Agboola, O.O. (2017) Mechanical Properties Improvement Evaluation of Medium Carbon Steels Quenched in Different Media. International Journal of Engineering Research in Africa, 32. pp. 1-10. ISSN 1663-4144
Ikubanni, P.P. and Adeleke, A.A. and Adediran, A.A and Agboola, O.O. (2018) Physico-mechanical properties of particle boards produced from locally sourced materials. International Journal of Scientific Research in Africa, 39. pp. 112-118.
Ikubanni, P.P. and Adeleke, A.A. and OGUNSEMI, B.T. and IBIKUNLE, R.A. Fabrication and Evaluation of Screw-like Fish Pelletizer. Journal of Physics: Conference Series.
Ikubanni, P.P. and Akande, K.A. and Agboola, O.O. (2017) Application of Anthropometric Approach in Lessening Disorders and Stress-Related Issues. Kathmandu University Journal of Science and Engineering. (In Press)
Ikubanni, P.P. and Komolafe, C.A and Agboola, O.O. and Osueke, C.O. (2017) MORINGA SEED DEHULLING MACHINE: A NEW CONCEPTUAL DESIGN. Journal of Production Engineering, 20 (2). pp. 73-78.
Ikubanni, P.P. and Komolafe, O. O. and Agboola, O.O. and Osueke, C.O. (2017) MORINGA SEED DEHULLING MACHINE: A NEW CONCEPTUAL DESIGN. Journal of Production Engineering, 20 (2). pp. 73-78.
Ikubanni, P.P. and Komolafe, O.O. and Agboola, O.O. and Osueke, C.O. (2017) MORINGA SEED DEHULLING MACHINE: A NEW CONCEPTUAL DESIGN. Journal of Production Engineering, 20 (2). pp. 73-78.
Ikubanni, P.P. and Oki, Makanjuola and Adeleke, A.A. and Adediran, A.A and Adesina, O. S. Influence of temperature on the chemical compositions and microstructural changes of ash formed from palm kernel shell. Results in Engineering, 8. pp. 1-9.
Ikubanni, P.P. and Oki, Makanjuola and Adeleke, A.A. and Omoniyi, P.O. (2021) Synthesis, physico‑mechanical and microstructural characterization ofAl6063/SiC/ PKSA hybrid reinforced composites. Scientific Reports, 11.
Ikubanni, Peter Pelumi and Agboola, Olayinka Oluwole and Ogunsemi, Bamidele Tope Development and performance evaluation of screw-like fish meal pelletizer. Agricultural Engineering International:CIGR Journal, 21 (4). pp. 169-176.
Imo, E. E. and Olayanju, T.M.A. and Ibikunle, F. and Dahunsi, S. O. (2020) Impact of small hydropower developments on rural transformation in Nigeria. Earth and Environmental Science, 445.
Iyanda, M.O. and Alhassan, Elijah A. and Adekanye, T. A. (2018) Design, Fabrication and Testing of Cocoa Depodding Machine. Mindanao Journal of Science and Technology, 16. pp. 11-24.
Kolawole, A and Agboola, O.O. and Ikubanni, P.P. and Raji, O. G. and Osueke, C.O. (2019) Reliability and power loss analysis: A case study of a power plant in Nigeria. MECHANICAL ENGINEERING | RESEARCH ARTICLE, 6. ISSN 2331-1916
Kolawole, A and Ikubanni, P.P. and Agboola, O.O. and Anifowose, O.B (2018) Development and performance evaluation of an economic solar grain dryer. International Journal of Mechanical Engineering and Technology, 9 (10). pp. 589-604.
Komolafe, C.A and Adejumo, A.O.D and Awogbemi, O. and Adeyeye, A.D. Development of a cocoa beans batch dryer. American Journal of Engineering Research.
Komolafe, C.A and Awogbemi, O. (2010) Fabrication and Performance Evaluation of an Improved Charcoal Cooking Stove. The Pacific Journal of Science and Technology, 11 (2). pp. 51-58.
Komolafe, C.A and Ikubanni, P.P. and Okonkwo, Clinton E. and Ajao, Faith Olusola and Alake, S. A. and Olayanju, T.M.A. (2020) Performance evaluation and optimization of a Moringa Oleifera depodding machine: A response surface approach. Heliyon, 6. ISSN 0 2405-8440
Komolafe, C.A and OLUWALEYE, I.O and Adejumo, A.O.D and OLADAPO, M.O (2013) Effects of drying Temperatures on the Quality of Three Tilapia Fish Species. International Journal of scientific research and management (IJSRM), 1 (7). pp. 371-375. ISSN ISSN (e): 2321 - 3418
Komolafe, C.A and OLUWALEYE, I.O and Awogbemi, O. and Osueke, C.O. (2019) Experimental investigation and thermal analysis of solar air heater having rectangular rib roughness on the absorber plate. Case Studies in Thermal Engineering, 14. ISSN 2214-157X
Komolafe, C.A and Ogunleye, I.O and Adejumo, A.O.D (2011) The Performance Evaluation Of a Convective Fish Dryer. International Journal of Advances in Science and Technology, 2 (5). pp. 58-64. ISSN 2229-5216
Komolafe, C.A and Ogunleye, I.O. and Adejumo, A.O.D (2011) Design and Fabrication of a Convective Fish Dryer. The Pacific Journal of Science and Technology, 12 (1). pp. 89-97.
Komolafe, C.A and Ojediran, J. O. and Ajao, F and Dada, Adewumi O. and Afolabi, Y.T and OLUWALEYE, I.O Modelling of moisture diffusivity during solar drying of locust beans with thermal storage material under forced and natural convection mode. Case studies in Thermal Engineering.
Komolafe, C.A and Waheed, M. A. and Kuye, S.I. and Adejumo, A.O.D Thermodynamic analysis of forced convective solar drying of cocoa with black coated sensible thermal storage material. Case studies in Thermal Engineering.
Komolafe, C.A and Waheed, M. A. and Kuye, S.I. and Adewumi, Babatunde A. and OLUWALEYE, I.O and Olayanju, Adeniyi Sun drying of cocoa with firebrick thermal storage materials. International Journal of Energy research.
Komolafe, C.A and Waheed, M. A. and Kuye, S.I. and Adewumi, Babatunde A. and OLUWALEYE, I.O and Olayanju, T.M.A. (2020) Sun drying of cocoa with firebrick thermal storage materials. International Journal of Energy Research.
Komolafe, Clement A. and Ojediran, J. O. and Ajao, Faith O. and Dada, Oluwasogo A. and Afolabi, Yemisi T. and Oluwaleye, Iyiola O. and Alake, Adewumi S. (2019) Modelling of moisture diffusivity during solar drying of locust beans with thermal storage material under forced and natural convection mode. Case Studies in Thermal Engineering, 15. p. 100542. ISSN 2214157X
Kuhe, Aondoyila and Aliyu, Samuel Jacob (2015) Gasification of ‘Loose’ Groundnut Shells in a Throathless Downdraft Gasifier. International Journal of Renewable Energy Development (IJRED), 4 (2). ISSN 2252-4940
Lasode, O.A and Balogun, Ayokunle O. Comparative Thermal Heating Behaviour. Journal of Sustainable Technology.
Modupe, A. E. and Atoyebi, O. D. and Basorun, A. O. and Gana, A. J. and Ramonu, John A. L. and Raphael, O. D. (2019) DEVELOPMENT AND PERFORMANCE EVALUATION OF CRUMB RUBBER –BIO-OIL MODIFIED HOT MIX ASPHALT FOR SUSTAINABLE HIGHWAY PAVEMENTS. International Journal of Mechanical Engineering and Technology (IJMET), 10 (2). pp. 273-287. ISSN 0976-6340; 0976-6359
Mwema, Fredrick M. and Adediran, A.A and Akinlabi, Esther Titilayo and Adeleke, A.A. and Olayanju, T.M.A. (2021) Fractal characterization of conductive Ag/flexible 3D printed PLA. IOP Conference Series: Materials Science and Engineering, 1107. 012050.
Mwema, Fredrick M. and Adediran, A.A and Akinlabi, Esther Titilayo and Adeleke, A.A. and Olayanju, T.M.A. (2021) Fractal characterization of conductive Ag/flexible 3D printed PLA. IOP Conference Series: Materials Science and Engineering, 1107 (1). 012050. ISSN 1757-8981
ODEWOLE, M.M. and SUNMONU, M.O. and OYENIYI, S.K. and ADESOYE, O.A. and Ikubanni, P.P. (2017) DEVELOPMENT OF U-CHANNEL SCREW JACK FOR VEGETABLE OIL EXTRACTION. Nigerian Journal of Technology (NIJOTECH), 36 (3). pp. 979-986. ISSN 2467-8821
OGUNSEMI, B.T. and Abioye, T.E and Orekunrin, T.M and Oladimeji, P.O and Jamiu, R.B and Ogedengbe, T.I Joint quality enhancement of AA6061-T6 friction stir weldment by reinforcing with pulverized glass waste using different reinforcement strategies. Engineering Research Express.
OGUNSEMI, B.T. and Ikubanni, P.P. and Adediran, A.A and Agboola, O.O. (2019) Effect of stand‑off height on the shear strength of ball grid array solder joints under varying pad sizes. SN Applied Sciences A SPRINGER NATURE Journal.
OGUNSEMI, B.T. and Ikubanni, P.P. and Agboola, O.O. and Adediran, A.A and Olawale, O. and IBIKUNLE, R.A. and Ake, Modupe and Oki, Makanjuola (2018) INVESTIGATIVE STUDY OF THE EFFECTS OF CERTAIN ADDITIVES ON SOME SELECTED REFRACTORY PROPERTIES OF ANT-HILL CLAY FOR FURNACE LINING. International Journal of Civil Engineering and Technology (IJCIET), 12. pp. 761-772. ISSN Print: 0976-6308 and ISSN Online: 0976-6316
Obajemihi, Obafemi Ibitayo and Olaoye, Joshua Olarenwaju and Cheng, Jun‐Hu and Ojediran, J. O. and Sun, Da‐Wen (2021) Optimization of process conditions for moisture ratio and effective moisture diffusivity of tomato during convective hot‐air drying using response surface methodology. Journal of Food Processing and Preservation, 45 (4). ISSN 0145-8892
Obajemihi, Obafemi Ibitayo and Olaoye, Joshua Olarenwaju and Ojediran, J. O. and Cheng, Jun‐Hu and Sun, Da‐Wen (2020) Model development and optimization of process conditions for color properties of tomato in a hot‐air convective dryer using box–behnken design. Journal of Food Processing and Preservation, 44 (10). ISSN 0145-8892
Odusote, J.K. and Shittu, Wasiu and Adeleke, A.A. and Ikubanni, P.P. and Adeyemo, O. (2019) Chemical and Mechanical Properties of Reinforcing Steel Bars from Local Steel Plants. pp. 229-309. ISSN doi: 10.1007/s11668-019-00695-x
Ofoegbu, Obinna and Umah, Nnamdi J. and Aliyu, Samuel Jacob (2019) Deracination of chitosan from locally sourced Millipede (Eurymerodesmus spp.) and its spectroscopic and physio-chemical properties. GSC Biological and Pharmaceutical Sciences, 7 (2). 095-107. ISSN 25813250
Oghogho, Ikponmwosa (2013) DEVELOPMENT OF AN ELECTRIC WATER PUMP CONTROLLER AND LEVEL INDICATOR. International Journal of Engineering and Applied Sciences, 3 (2). pp. 18-21. ISSN 2305-8269
Oghogho, Ikponmwosa (2013) Design and Construction of a Solar Water Heater Based on the Thermosyphon Principle. Journal of Fundamentals of Renewable Energy and Applications, 3 (2013). pp. 1-8.
Ogunsemi, B.T. and Abioye, T.E and Ogedengbe, T.I and Zuhailawati, H. A review of various improvement strategies for joint quality of AA 6061-T6 friction stir weldments. Journal of Materials Research and Technology, 2021 (11). pp. 1061-1089.
Ogunsemi, B.T. and Eta, O.M and Olanipekun, E. and Abioye, T.E and Ogedengbe, T.I Tensile strength prediction by regression analysis for pulverized glass waste-reinforced aluminium alloy 6061-T6 friction stir weldments. Sadhana Journal-Academy Proceedings in Engineering Sciences, 47 (2). pp. 1-12.
Ogunsemi, Bamidele and Ikubanni, Peter and Abolusoro, Olatunji and Adeleke, Adekunle and Ojo, Oluwole Performance improvement of AA6061-T651 friction stir butt-weldment using particulate addition strategy. Research on Engineering Structures and Materials.
Ogunsemi, Bamidele T. and Ikubanni, Peter P. and Adediran, Adeolu A. and Agboola, Olayinka O. Effect of stand‑of height on the shear strength of ball grid array solder joints under varying pad sizes. SN Applied Sciences (Springer Nature), 1 (32).
Ojediran, J. O. and Adewumi, Adejoke D. and Oladele, S.O and Moses, Olumuyiwa and Olayanju, T.M.A. and Okonkwo, Clinton E. (2021) Evaluating the Drying Characteristics of Paddy Rice Using Superheated Steam Dryer. IOP Conference Series: Materials Science and Engineering, 1107 (1). 012044. ISSN 1757-8981
Ojediran, J. O. and Dada, Adewumi O. and Aniyi, Stephen O. and David, Robinson O. (2021) Mechanism and Isotherm Modeling of Effective Adsorption of Malachite Green as Endocrine Disruptive Dye using Acid Functionalized Maize Cob (AFMC). Research Square.
Ojediran, J. O. and Dahunsi, S. O. and Aderibigbe, V and Abolusoro, S. A. and Adesulu-Dahunsi, A.T. and Odekanle, E. L and Odejobi, O.J. and IBIKUNLE, R.A. and Ogunwole, J.O Valorization of Pennisetum purpureum (Elephant grass) and piggery manure for energy generation. ELSEVIER.
Ojediran, J. O. and Okonkwo, Clinton E. and Adeyi, Abiola and Adeyi, Oladayo and Olaniran, A. F and George, Nana and Olayanju, T.M.A. (2020) Drying characteristics of yam slices (Dioscorea rotundata) in a convective hot air dryer: application of ANFIS in the prediction of drying kinetics. Heliyon, 6 (3). e03555. ISSN 24058440
Ojediran, J. O. and Okonkwo, Clinton E. and Olaniran, A. F and Olayanju, T.M.A. and Adewumi, Adejoke D. and Oluwakemi, Erinle and Alhassan, Elijah A. and Idahosa, E.O (2021) Mathematical modeling of the moisture ratio during drying of Yam (Dioscorea rotundata) in a hot air dryer. IOP Conference Series: Materials Science and Engineering, 1107 (1). 012062. ISSN 1757-8981
Oki, M and Akintola, S.A and Adediran, A.A and Ikubanni, P.P and Ogunsemi, B.T Reinforcement bar Corrosion - Causes and Management. Journal of Physics:Conference Series, 1378 (2019). pp. 1-10.
Oki, Makanjuola (2015) HYBRID MANGANATE-BASED CONVERSION COATING ON ALUMINIUM. European Journal of Engineering and Technology, 3 (2). ISSN 2056-5860
Oki, Makanjuola (2013) Microstructural and Compositional Characterisation of Chromate Pretreatment on Aluminium. ISRN Materials Science, 2013.
Oki, Makanjuola (2007) Studies on Chromium-free Conversion coatings on Aluminum. Journal of Applied Sciences and Environmental Management, 11 (2). pp. 187-190. ISSN 1119-8362
Oki, Makanjuola and Adediran, A.A (2018) Permanganate - Based Hybrid Nano-Conversion Coating on Aluminium. Advanced Engineering Forum, 26. pp. 33-40. ISSN 2234-991X,
Oki, Makanjuola and Adediran, A.A (2017) Permanganate - Based Hybrid Nano-Conversion Coating on Aluminium. Advanced Engineering Forum, 26. pp. 33-40. ISSN 2234-991X
Oki, Makanjuola and Adediran, A.A and Anawe, P.A. (2013) Corrosion Monitoring in the Oil Pipeline Industry. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 2 (1). ISSN 3159-0040
Oki, Makanjuola and Adediran, A.A and OGUNSEMI, B.T. and Agboola, O.O. and Olayinka, Saheed and Ogunsola, O. (2018) Improvement in Corrosion Resistance of Aluminium Alloy by Permanganate-based Conversion Coating. Journal of Physical Science, 29 (2). pp. 13-24.
Oki, Makanjuola and Adediran, A.A and OGUNSEMI, B.T. and Agboola, O.O. and Olayinka, Saheed and Ogunsola, O. Improvement in Corrosion Resistance of Aluminium Alloy by Permanganate-based Conversion Coating. Journal of Physical Science, 29 (2). pp. 13-24.
Oki, Makanjuola and Adediran, A.A and OGUNSEMI, B.T. and Agboola, O.O. and Olayinka, Saheed and Ogunsola, Oyeyemi (2018) Improvement in Corrosion Resistance of Aluminium Alloy by Permanganate-based Conversion Coating. Journal of Physical Science, 29 (2). pp. 13-24.
Oki, Makanjuola and Adediran, A.A and OGUNSEMI, B.T. and Akintola, Sarah Abidemi and Charles, Ebitei (2018) Conversion Coating Pretreatment Enhances Pipeline Integrity. American Journal of Chemistry and Applications 2018; 5(3): 53-56, 5 (3). pp. 53-56. ISSN 2381-4535
Oki, Makanjuola and Adediran, A.A and Olayinka, Saheed and Ogunsola, Oyeyemi (2017) Development and performance of hybrid coatings on aluminium alloy. J. Electrochem. Sci. Eng., 7. ISSN 1847-9286
Oki, Makanjuola and Adediran, A.A and Olayinka, Saheed and Ogunsola, Oyeyemi (2017) Development and performance of hybrid coatings on aluminium alloy. J. Electrochem. Sci., 7.
Oki, Makanjuola and Anawe, P.A. (2015) A Review of Corrosion in Agricultural Industries. Physical Science International Journal, 5 (4). pp. 216-222. ISSN 2348-0130
Oki, Makanjuola and Ebitei, C. and Alaka, C. and Oki, T.K. (2011) Corrosion Inhibition of Mild Steel in Hydrochloric Acid by Tannins from Rhizophora Racemosa. Materials Sciences and Applications, 2. pp. 592-595.
Okonkwo, Clinton E. and Olaniran, A. F and Adeyi, Oladayo and Adeyi, Abiola and Ojediran, J. O. and Adewumi, Adejoke D. and Iranloye, Yetunde Mary and Erinle, Oluwakemi Christianah (2021) Drying characteristics of fermented‐cooked cassava chips used in the production of complementary food: Mathematical and Gaussian process regression modeling approaches. Journal of Food Process Engineering, 44 (7). ISSN 0145-8876
Okonkwo, Ugochukwu C. and Onokwai, A. O and Okeke, Chinedu L. and Osueke, C.O. and Ezugwu, C. A and Diarah, R. S. and Aremu, C. O. (2019) INVESTIGATION OF THE EFFECT OF TEMPERATURE ON THE RATE OF DRYING MOISTURE AND CYANIDE CONTENTS OF CASSAVA CHIPS USING OVEN DRYING PROCESS. International Journal of Mechanical Engineering and Technology (IJMET), 10 (1). pp. 1507-1520. ISSN 0976-6340; 0976-6359
Okunola, Abiodun A. and Adekanye, T. A. and Adewumi, Adejoke D. and Asamu, Festus (2019) RICE PROCESSING OPERATIONS. International Journal of Civil Engineering and Technology, 10 (2). pp. 2197-2204. ISSN 0976-6308
Okunola, Abiodun A. and Adekanye, T. A. and Ayooluwa, A. and Okonkwo, Clinton E. and Alake, S. A. and Olayanju, T.M.A. and Adewumi, Adejoke D. DEVELOPMENT OF A LOCUST BEAN SEED DEHULLING CUM WASHING MACHINE. International Journal of Mechanical Engineering and Technology. ISSN 0976-6340
Okunola, Abiodun A. and Adekanye, T. A. and Ayooluwa, A. and Okonkwo, Clinton E. and Alake, S. A. and Olayanju, T.M.A. and Adewumi, Adejoke D. (2019) DEVELOPMENT OF A LOCUST BEAN SEED DEHULLING CUM WASHING MACHINE. International Journal of Mechanical Engineering and Technology (IJMET), 10 (1). pp. 1321-1330. ISSN 0976-6340; 0976-6359
Okunola, Abiodun A. and Ajayi, A.E. and Daniya, O.I. and Olasehinde, D.A. (2019) Performance Evaluation of Anaerobic Technology in Handling High Strength Effluent of a Brewery. Journal of Engineering and Applied Sciences, 14 (22). pp. 8373-8378. ISSN 1816949X
Okunola, Abiodun A. and Igbeka, Joseph C. and Arisoyin, A. G. (2015) Development and evaluation of a cereal cleaner. Journal of Multidisciplinary Engineerring Science and Technology, 2 (6). pp. 1587-1592. ISSN 31590040
Okunola, Abiodun A. and Isaac-Bamgboye, A Performance evaluation of a rice cleaning and grading machine. CIGR Section VI International Technical Symposium. pp. 1-4.
Okunola, Abiodun A. and Okunola, Caroline O. and Ofuya, Thomas (2019) Acceptability and Sensory Evaluation of Maize and Cowpea Products Stored with some Essential Oils. International Journal of Agricultural Research and Food Production, 4 (1). pp. 40-45. ISSN 2536-734x
Oladeji, O.S and Dahunsi, S. O. and Adesulu-Dahunsi, A.T. and Ojo, S. I. A. and Lawal, A. I. and Idowu, A. O. and Olanipekun, A.A and IBIKUNLE, R.A. and Osueke, C.O. and Ajayi, E.O. and Osueke, Ngozi and Evbuomwan, Ikponmwosa Energy generation from anaerobic co-digestion of food waste, cow dung and piggery dung. ELSEVIER.
Oladejo, N. K. and Abolarinwa, Abimbola and Salawu, S. O. and Bamiro, O. M. and Lukman, A. F. and Bukari, H. I. (2019) APPLICATION OF OPTIMIZATION PRINCIPLES IN CLASSROOM ALLOCATION USING LINEAR PROGRAMMING. International Journal of Mechanical Engineering and Technology (IJMET), 10 (1). pp. 874-885. ISSN 0976-6340; 0976-6359
Oladele, O.I. and Makinde-Isola, B. A. and Adediran, A.A and Oladejo, M. O. and Owa, A. F. and Olayanju, T.M.A. (2020) Mechanical and wear behaviour of pulverised poultry eggshell/sisal fiber hybrid reinforced epoxy composites. Material Research Express, 7. pp. 1-12.
Olaoye, Joshua Olarenwaju and Adekanye, T. A. (2011) ANALYSIS OF THE MOTION OF WEEDING TOOLS AND DEVELOPMENT OF A ROTARY POWER WEEDER. Journal of Agricultural Engineering and Technology (JAET), 19 (2). pp. 9-25.
Olaoye, Joshua Olarenwaju and Adekanye, T. A. (2018) Cracking and separation of palm nuts in a mechanical cracker. Croat. J. Food Sci. Technology, 10 (1). pp. 1-9.
Olaoye, Joshua Olarenwaju and Adekanye, T. A. (2015) A SURVEY OF RELIABILITY OF TILLAGE EQUIPMENT IN OSUN STATE, NIGERIA. Ethiopian Journal of Environmental Studies & Management, 8 (1). pp. 1-12. ISSN 1998-0507
Olawale, O. and Adediran, A.A and Talabi, Segun Isaac and Nwokocha, Geraldine Chika and Ameh, Alewo Opuada (2017) Inhibitory action of Vernonia amygdalina extract (VAE) on the corrosion of carbon steel in acidic medium. J. Electrochem. Sci. Eng., 7. ISSN 1847-9286
Olawale, O. and OGUNSEMI, B.T. and Abayomi, S. J. and Uguru-Okorie, D.C and Okunola, Abiodun A. and Oni, S. O. and Kolawole, O. D. and Ikpotokin, I. (2018) Optimization of Katemfe Seed Extract as A Corrosion Inhibitor for Mild-Steel in 0.5M Hcl. International Journal of Civil Engineering and Technology, 9 (13). pp. 1394-1402.
Olawale, O. and Oyawale, F. A. and Adepoju, T. F. and Aikulolu, S. and Akinmoladun, A. I. (2015) Optimisation of Diesel Polluted Soil Using Response Surface Methodology. International Journal of Environmental Protection and Policy, 3 (6). pp. 194-202. ISSN 2330-7528; 2330-7536
Olayanju, T.M.A. (2003) Effect of wormshaft speed and moisture content on oil and cake qualities of expelled sesame seed. Tropical Science, 43 (4). pp. 181-183.
Olayanju, T.M.A. and AKINOSO, R. and ADERINLEWO, A. A. and DAIRO, O. U. and OLA, I. A. (2009) MOISTURE DEPENDENCE OF SOME AERODYNAMIC PROPERTIES OF BENISEED. Journal of Natural Sciences, Engineering and Technology, 8 (1). pp. 62-70.
Olayanju, T.M.A. and Okonkwo, Clinton E. and Ojediran, J. O. and Alake, S. A. and Alhassan, Elijah A. and Okunola, Abiodun A. (2019) Design, Development and Evaluation of a Tangential-flow PaddyThresher: A Response Surface Analysis. Asian Journal of Scientific Research. pp. 1-10. ISSN 1992-1454
Olayanju, T.M.A. and Okonkwo, Clinton E. and Ojediran, J. O. and Hussain, Syed Zameer and Dottie, Ewhoritsemogha P. and Ayoola, Ayooluwa S. (2021) Interactive effects and modeling of some processing parameters on milling, cooking, and sensory properties for Nigerian rice using a one-step ricemilling machine. Heliyon, 7. e067392. ISSN 2405-8440
Olusegun, David Samuel and Stephen, Agbo and Adekanye, T. A. (2012) Assessing Mechanical Properties of Natural Fibre Reinforced Composites for Engineering Applications. Journal of Minerals and Materials Characterization and Engineering, 11 (1). pp. 780-784.
Onokwai, A. O and Okonkwo, Ugochukwu C. and Osueke, C.O. and Eze, N. C. and Diarah, R. S. and Olawale, O. (2019) QUANTIFYING CASSAVA WASTE GENERATION AND BIOGAS PRODUCTION IN EHA-ALUMONA GRINDING MILLS. http://www.iaeme.com/IJCIET/index.asp 2032 editor@iaeme.com International Journal of Civil Engineering and Technology (IJCIET), 10 (1). pp. 2032-2043. ISSN ISSN Print: 0976-6308 and ISSN Online: 0976-6316
Onokwai, A. O and Okonkwo, Ugochukwu C. and Osueke, C.O. and Okafor, Christian E. and Olayanju, T.M.A. and Dahunsi, S. O. (2019) Design, modelling, energy and exergy analysis of a parabolic cooker. Renewable Energy, 142. pp. 497-510. ISSN 0960-1481
Onwuegbunam, D. O. and Nayan, G Z and Olayanju, T.M.A. and Onwuegbunam, N. E. (2020) Effects of operating pressure, lateral length and irrigation period on the fuel consumption of a centrifugal pump in a pressurized drip irrigation system. IOP Conf. Series: Earth and Environmental Science, 445.
Orhadahwe, T. A. and Adeleke, A.A. and Ikubanni, P.P. and Agboola, O.O. (2020) Evaluating the Effectiveness of Maintenance Practice: Case Study of a University Power Generating Plant Unit. Engineering and Applied Science Research, 47 (2). pp. 170-174.
Osueke, C.O. and Akinnuli, B.O. and Adediran, A.A and Ikubanni, P.P. and Agboola, O.O. (2015) An Algorithm of a Convectional Factory Electric Tray Dryer. The International Journal of Engineering and Science, 4 (6). pp. 17-25. ISSN 2319-1813
Osueke, C.O. and Akinnuli, B.O. and Adediran, A.A and Ikubanni, P.P. and Agboola, O.O. (2015) An Algorithm of a Convectional Factory Electric Tray Dryer. The International Journal of Engineering and Science, 4 (6). pp. 17-25. ISSN 2319-1813
Osueke, C.O. and Akinnuli, B.O. and Adediran, A.A and Ikubanni, P.P. and Agboola, O.O. (2015) An Algorithm of a Convectional Factory Electric Tray Dryer. The International Journal Of Engineering And Science (IJES), 4 (6). pp. 17-25.
Osueke, C.O. and Akinnuli, B.O. and Adediran, A.A and Ikubanni, P.P. and Agboola, O.O. (2015) An Algorithm of a Convectional Factory Electric Tray Dryer. The International Journal Of Engineering And Science (IJES), 4 (6). pp. 17-25. ISSN ISSN (e): 2319 – 1813 ISSN
Osueke, C.O. and Ikpotokin, I. (2014) Experimental and Numerical Investigations of Forced Convection in Tube-Type Heat Exchanger. International Journal of Engineering Research and Development, 10 (6). pp. 22-31. ISSN 2278-067X
Osueke, C.O. and Olayanju, T.M.A. and Ezugwu, C. A and Onokwai, A. O and Ikpotokin, I. and Uguru-Okorie, D.C and Nnaji, F. C. (2018) Comparative Calorific Evaluation of Biomass Fuel and Fossil Fuel. International Journal Civil Engineering and Technology, 9 (13). pp. 1576-1590.
Osueke, C.O. and Onokwai, A. O and Ezugwu, C. A and Patrick, Uzendu and Okunola, Abiodun A. and Ikpotokin, I. and Micheal, Ibiwoye (2018) Design and Fabrication of Anaerobic Digester for Biogas Production. International Journal of Civil Engineering and Technology, 9 (11). pp. 2639-3648.
Osueke, C.O. and Uguru-Okorie, D.C (2012) The Role Of Tire In Car Crash, Its Causes, And Prevention. International Journal of Emerging Technology and Advanced Engineering, 2 (12).
Osueke, C.O. and Uguru-Okorie, D.C and Abanihi, Kenechi (2013) Electricity Stability in Nigeria Through Increased Hydro Power Generation. International Journal of Emerging Technology and Advanced Engineering, 3 (1). ISSN 2250-2459
Osueke, C.O. and Uguru-Okorie, D.C and Kuhe, A (2015) Sample Size Effect on Combustion Analysis. International Journal of Scientific Engineering and Technology, 4 (7). pp. 401-406. ISSN 2277-1581
Oyegoke, S. O. and Sojobi, A. O. (2012) Developing Appropriate Techniques to Alleviate the Ogun River Network Annual Flooding Problems. International Journal of Scientific & Engineering Research, 3 (2). pp. 1-7. ISSN 2229-5518
Raphael, O. D. and Adekanye, T. A. and Alhassan, Elijah A. Maximizing the Full Economic Potentials of Ikere Gorge and Oyan Dams for National Economic Development. African Journal of Agricultural Science and Technology, 4 (3). pp. 633-641.
Saleh, A. and AKANDE, F.A. and Adekanye, T. A. (2020) POULTRY DROPPING BIOGAS. Nigerian Journal of Scientific Research, 19 (1). pp. 11-20. ISSN 0794-0319
Sobowale, Sunday Samuel and Oluwole, Omotoso Benjamin and Olatidoye, Olawale Paul and Eweje, Opeoluwa Abayomi and Olayanju, T.M.A. and Adebo, Oluwafemi Ayodeji (2021) Design and construction of a mechanized charcoal-fueled corn roaster. AgricEngInt, 22 (4). pp. 93-101.
Uguru-Okorie, D.C and Dare, A. A. (2013) Combustion Enhancers in Diesel Engines: Magnetic Field Option. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 5 (5). pp. 21-24. ISSN e-ISSN: 2278-1684
Uguru-Okorie, D.C and Dare, A. A. and Burluka, A.A. (2017) KNOCK CHARACTERISTICS ANALYSIS OF A SUPERCHARGED SPARK IGNITION ENGINE USING THREE GRADES OF FUELS. Nigerian Journal of Technology (NIJOTECH), 36 (2). pp. 505-514. ISSN Print ISSN: 0331-8443, Online ISSN: 2467-8821
Uguru-Okorie, D.C and Ikpotokin, I. and Ajiboye, M. O. and Ojediran, M. E. FTIR Investigation of the Effect of Storage on Ogogoro Gasoline Blend’s Stability. IOP Conf. Series: Materials Science and Engineering, 412. 01-06.
Uguru-Okorie, D.C and Ikpotokin, I. and Fadare, A. David (2019) A COMPARATIVE STUDY OF FLOW AND HEAT TRANSFER CHARACTERISTICS OF STAGGERED AND IN-LINE CROSS-FLOW TUBE-TYPE HEAT EXCHANGERS, PART II: THE FINITE ELEMENT ANALYSIS. International Journal of Mechanical Engineering and Technology (IJMET), 10 (2). pp. 169-186. ISSN 0976-6340; 0976-6359
Uguru-Okorie, D.C and Ikpotokin, I. and Osueke, C.O. and Fadare, A. David (2018) Experimental Comparison of Staggered and In-line Tube-bank Thermal Performance. International Journal of Mechanical Engineering and Technology, 9 (13). pp. 1061-1070.
Uguru-Okorie, D.C and Ikpotokin, I. and Osueke, C.O. and Olawale, O. (2019) Wind Energy Systems for Omu Aran, Kwara State, Nigeria. Journal of Physics: Conference Series, 1378. 032008. ISSN 1742-6588
Uguru-Okorie, D.C and Kuhe, A and Ikpotokin, I. (2015) Stand-alone wind energy systems for power generation in Nigeria. International Journal of Advanced Information Science and Technology, 38 (38). pp. 63-72. ISSN 2319:2682
oyewole, olamide and Adeoye, J. Busayo and lucas, mark and olugbemi, wura (2024) Optimization Study of Eggshell Extract as Inhibitor of Mild Steel Corrosion in a 30 wt% NaCl Solution. Optimization Study of Eggshell Extract as Inhibitor of Mild Steel Corrosion in a 30 wt% NaCl Solution, 42. pp. 123-136.
Adewumi, J. K. and Olayanju, T.M.A. and Adewuyi, S. A. (2007) SUPPORT FOR SMALL RICE THRESHERS IN NIGERIA. In: SUPPORT FOR SMALL RICE THRESHERS IN NIGERIA. Agricultural Media Resources and Extension Centre (Amrec) University of Agriculture, Abeokuta, pp. 1-60.
Akande, K.A. and Adegun, I.K and Awoyemi, A.O. and Ikubanni, P.P. (2013) Anthropometric Measurements Analysis of Ergonomic Chair Design for the Indigenous Weavers in Ilorin, Nigeria. In: Human factor, sustainable life and mobility, 16th - 18th October, 2013, Torino, Italy.
Akinlabi, S. A. and Ogbonna, O. S. and Mashinini, P. M. and Adediran, A.A and Fatoba, O. S. and Akinlabi, Esther Titilayo (2019) Titanium and Epoxy for Automobile application: A Review. In: Proc. of the Eighth Intl. Conf. on Advances in Civil, Structural and Mechanical Engineering - CSM 2019, 23-24 April 2019, Birmingham City.
GILLIAN, O. I and Andrew, C O and Aliyu, S.J. (2015) Production and testing of biodiesel methyl ester fuels from Nigerian tropical seed oil feedstocks. In: . Proceeding of 14th International Conference on Sustainable Energy Technologies, 25th - 27th August 2015, Nottingham, UK.
Shittu, T. A. and Ogunjinmi, O. and Ola, I. A. and Sobukola, O. P. and Sogunle, O. M. and Olayanju, T.M.A. and Dairo, O. U. (2012) OPTIMIZATION OF A CONVECTIVE DRYING PROCESS FOR PRODUCING STARCH-ALBUMEN POWDER AS COATING MATERIAL IN FRIED FOODS. In: 18th International Drying Symposium (IDS 2012), 11-15 November2012, Xiamen, China.
Shittu, T. A. and Ogunjinmi, O. and Ola, I. A. and Sobukola, O. P. and Sogunle, O. M. and Olayanju, T.M.A. and Dairo, O.U. (2012) OPTIMIZATION OF A CONVECTIVE DRYING PROCESS FOR PRODUCING STARCH-ALBUMEN POWDER AS COATING MATERIAL IN FRIED FOODS. In: 18th International Drying Symposium (IDS 2012, 11-15 November 2012, Xiamen, China.
Uguru-Okorie, D.C and Ikpotokin, I. and Ajiboye, M. O. and Ojediran, M.E (2018) FTIR Investigation of the Effect of Storage on Ogogoro-Gasoline Blend’s Stability. In: IOP Conf. Series: Materials Science and Engineering.
Ikpotokin, I. (2017) A STUDY OF HEAT TRANSFER AND FLUID FLOW CHARACTERISTICS IN TUBE BANKS. LAP LAMBERT Academic Publishing, Saarbrücken Deutschland/Germany. ISBN 978-3-330-06332-7
Diarah, R. S. and Oyetunji, Samson A. and Osueke, C.O. and Onokwai, A. O (2019) Dataset on cellular and geo-spatial information of a 10 km distance along Akure-Ilesha road. [Dataset]
Adediran, A.A (2022) Curriculum Vitae for Dr. Adediran A.A. UNSPECIFIED. (Unpublished)
Ogundipe, Oluwasogo.L (2021) Curriculum Vitae for Mr. Ogundipe Oluwasogo Lekan. Nil. (Unpublished)
Okunola, Abiodun A. (2021) CURRICULUM VITAE. UNSPECIFIED. (Unpublished)