Items where Author is "Ikubanni, P.P."

Group by: Item Type | No Grouping

Jump to: Article | Conference or Workshop Item | Dataset

Number of items: 81.

Article

Balogun, Oluwatosin and Akinwande, Abayomi and Adediran, A.A and Ikubanni, P.P. and Samuel, Shittu and Adesina, O. S. (2021) Experimental Study on the Properties of Fired Sand–Clay Ceramic Products for Masonry Applications. Journal of Materials in Civil Engineering, 33 (2).

Ohijeagbon, I.O. and Bello-Ochende, M.U. and Adeleke, A.A. and Ikubanni, P.P. and Samuel, A.A. and Lasode, O.A. and Atoyebi, O.D. (2021) Physico-mechanical properties of cement bonded ceiling board developed from teak and African locust bean tree wood residue. Materials Today: Proceedings, 44. pp. 2865-2873. ISSN 22147853

Ikubanni, P.P. and Oki, Makanjuola and Adeleke, A.A. and Omoniyi, P.O. (2021) Synthesis, physico‑mechanical and microstructural characterization ofAl6063/SiC/ PKSA hybrid reinforced composites. Scientific Reports, 11.

Ohijeagbon, I.O. and Adeleke, A.A. and Mustapha, V.T. and Olorunmaiye, J.A. and Okokpujie, I.P. and Ikubanni, P.P. (2020) Development and characterization of wood-polypropylene plastic-cement composite board. Case Studies in Construction Materials, 8. pp. 1-8.

Adeleke, A.A. and Odusote, J.K. and Ikubanni, P.P. and Lasode, O. A. and Malathi, M. and Paswan, D. (2020) Essential basics on biomass torrefaction, densificationand utilization. International Journal of Energy Research. pp. 1-12.

Orhadahwe, T. A. and Adeleke, A.A. and Ikubanni, P.P. and Agboola, O.O. (2020) Evaluating the Effectiveness of Maintenance Practice: Case Study of a University Power Generating Plant Unit. Engineering and Applied Science Research, 47 (2). pp. 170-174.

Agboola, O.O. and Ikubanni, P.P. and Adeleke, A.A. and Adediran, A.A and Adesina, O. S. and Aliyu, S.J (2020) Optimization of heat treatment parameters of medium carbon steel quenched in different media using Taguchi method and grey relational analysis. Heliyon, 6. ISSN 04444

Agboola, O.O. and Ikubanni, P.P. and Adeleke, A.A. and Adediran, A.A. and Adesina, O.S. and Aliyu, S.J. and Olabamiji, T.S. (2020) Optimization of heat treatment parameters of medium carbon steel quenched in different media using Taguchi method and grey relational analysis. Heliyon, 6 (7). e04444. ISSN 24058440

Komolafe, C.A and Ikubanni, P.P. and Okonkwo, Clinton E. and Ajao, Faith Olusola and Alake, S. A. and Olayanju, T.M.A. (2020) Performance evaluation and optimization of a Moringa Oleifera depodding machine: A response surface approach. Heliyon, 6. ISSN 0 2405-8440

Adekunle, A. S. and Adeleke, A.A. and Sam Obu, C. V. and Ikubanni, P.P. and Ibitoye, S. E. and Azeez, T. M. (2020) Recycling of plastics with compatibilizer as raw materials for the production of automobile bumper. Cogent Engineering, 7 (1). pp. 1-14.

Adeleke, A.A. and Odusote, J.K. and Ikubanni, P.P. and Lasode, O. A. and Malathi, M. and Paswan, D. (2020) The ignitability, fuel ratio and ash fusion temperatures of torrefied woody biomass. Heliyon, 6. pp. 1-7.

Ikubanni, P.P. and Oki, Makanjuola and Adeleke, A.A. (2020) A review of ceramic/bio-based hybrid reinforced aluminium matrix composites. Cogent Engineering, 7 (1). pp. 1-19.

Odusote, J.K. and Shittu, Wasiu and Adeleke, A.A. and Ikubanni, P.P. and Adeyemo, O. (2019) Chemical and Mechanical Properties of Reinforcing Steel Bars from Local Steel Plants. pp. 229-309. ISSN doi: 10.1007/s11668-019-00695-x

Adeleke, A.A. and Odusote, J.K. and Lasode, O. A. and Ikubanni, P.P. and Madhurai, M. and Paswan, D. (2019) Evaluation of thermal decomposition characteristics and kinetic parameters of melina wood. Biofuels Journals. ISSN 1759-7269 (Print) 1759-7277 (Online

Adeleke, A.A. and Odusote, J.K. and Olasode, O.A. and Ikubanni, P.P. and Malathi, M. and Paswan, D. (2019) Mild pyrolytic treatment of Gmelina arborea for optimum energetic yields. MATERIALS ENGINEERING, 6.

Kolawole, A and Agboola, O.O. and Ikubanni, P.P. and Raji, O. G. and Osueke, C.O. (2019) Reliability and power loss analysis: A case study of a power plant in Nigeria. MECHANICAL ENGINEERING | RESEARCH ARTICLE, 6. ISSN 2331-1916

Adekunle, K. and Ikubanni, P.P. and Agboola, O.O. and Alebiosu, Afeez (2019) COMPARATIVE ANALYSIS OF ANTHROPOMETRIC DATA OF HAUSAS IN NORTHERN AND SOUTHERN NIGERIA. Journal of Applied Engineering Science, 17. pp. 168-174. ISSN 1451-4117

Adeleke, A.A. and Odusote, J.K. and Lasode, O. A. and Ikubanni, P.P. and Malathi, M. and Paswan, D. (2019) Densification of coal fines and mildly torrefied biomass into composite fuel using different organic binders. Heliyon, 5. ISSN 2405-8440

OGUNSEMI, B.T. and Ikubanni, P.P. and Adediran, A.A and Agboola, O.O. (2019) Effect of stand‑off height on the shear strength of ball grid array solder joints under varying pad sizes. SN Applied Sciences A SPRINGER NATURE Journal.

Akintola, Sarah Abidemi and Oki, Makanjuola and Aleem, A.A. and Adediran, A.A and Akpor, O.B. and Oluba, Olarewaju M. and OGUNSEMI, B.T. and Ikubanni, P.P. (2019) Valorized chicken feather as corrosion inhibitor for mild steel in drilling mud. Results in Engineering, 4. ISSN 2590-1230

IBIKUNLE, R.A. and Ikubanni, P.P. and Agboola, O.O. and OGUNSEMI, B.T. (2018) Development and performance evaluation of palm nut cracker. Leonardo Electronic Journal of Practices and Technologies (33). pp. 219-234. ISSN 1583-1078

OGUNSEMI, B.T. and Ikubanni, P.P. and Agboola, O.O. and Adediran, A.A and Olawale, O. and IBIKUNLE, R.A. and Ake, Modupe and Oki, Makanjuola (2018) INVESTIGATIVE STUDY OF THE EFFECTS OF CERTAIN ADDITIVES ON SOME SELECTED REFRACTORY PROPERTIES OF ANT-HILL CLAY FOR FURNACE LINING. International Journal of Civil Engineering and Technology (IJCIET), 12. pp. 761-772. ISSN Print: 0976-6308 and ISSN Online: 0976-6316

Agboola, O.O. and Ikubanni, P.P. and OGUNSEMI, B.T. and IBIKUNLE, R.A. and Adediran, A.A and Kareem, B. (2018) Dataset for the development of a diagnostic schedule for a defective LC-195V5 CNC milling machine at FUTA central workshop. ELSEVIER. pp. 2352-3409.

Agboola, O.O. and Ikubanni, P.P. and OGUNSEMI, B.T. and IBIKUNLE, R.A. and Adediran, A.A and Kareem, B. and Akinnuli, B.O. and Osueke, C.O. (2018) Dataset for the development of a diagnostic schedule for a defective LC-195V5 CNC milling machine at FUTA central workshop. Data in Brief, 21. 1496 -1503.

IBIKUNLE, R.A. and Titiladunayo, I.F. and Akinnuli, B.O. and Lukman, A. F. and Ikubanni, P.P. and Agboola, O.O. (2018) Modelling the energy content of municipal solid waste and determination of its physico-chemical correlation using multiple regression analysis. International Journal of Mechanical Engineering and Technology, 9 (11). pp. 220-232.

Ikubanni, P.P. and Adeleke, A.A. and Adediran, A.A and Agboola, O.O. (2018) Physico-mechanical properties of particle boards produced from locally sourced materials. International Journal of Scientific Research in Africa, 39. pp. 112-118.

Kolawole, A and Ikubanni, P.P. and Agboola, O.O. and Anifowose, O.B (2018) Development and performance evaluation of an economic solar grain dryer. International Journal of Mechanical Engineering and Technology, 9 (10). pp. 589-604.

Adekunle, A.A and Ikubanni, P.P. and Martins, O.O. (2018) Development of computer aided design software for piston movement. International Journal of Mechanical Engineering and Technology, 9 (10). pp. 775-783.

Adeleke, A.A. and Ikubanni, P.P. and Adediran, A.A and Agboola, O.O. and Olabamiji, T.S. and Ogunsola, O. and Ibeawuchi, C. (2018) TENSILE STRENGTH AND MICROSTRUCTURAL BEHAVIOUR OF MEDIUM CARBON STEEL QUENCHED IN SOME SELECTED MEDIA. International Journal of Civil Engineering and Technology, 9 (10). 2148 -2156.

Adeleke, A.A. and Odusote, J.K. and Ikubanni, P.P. and Lasode, O.A. L and Agboola, O.O. and Ammasi, A. and Ajao, K.R. (2018) Dataset on the evaluation of chemical and mechanical properties of steel rods from local steel plants and collapsed building sites. Data in Brief, 21. pp. 1552-1557.

Adekunle, A.A and Ikubanni, P.P. and Agboola, O.O. (2018) An Expert System for Automobile Repairs and Maintenance. Mindanao Journal of Science and Technology, 16. pp. 41-56.

Adekunle, Adefemi and Ikubanni, P.P. and Agboola, O.O. (2018) An Expert System for Automobile Repairs and Maintenance. Mindanao Journal of Science and Technology, 16. pp. 1-20.

Ikubanni, P.P. and Komolafe, C.A and Agboola, O.O. and Osueke, C.O. (2017) MORINGA SEED DEHULLING MACHINE: A NEW CONCEPTUAL DESIGN. Journal of Production Engineering, 20 (2). pp. 73-78.

Ikubanni, P.P. and Adediran, A.A and Adeleke, A.A. and Ajao, K.R. and Agboola, O.O. (2017) Mechanical Properties Improvement Evaluation of Medium Carbon Steel Quenched in Different Media. International Journal of Engineering Research in Africa, 32. pp. 1-10.

Agboola, O.O. and Ikubanni, P.P. and IBIKUNLE, R.A. and Adediran, A.A and OGUNSEMI, B.T. (2017) Generation of Calibration Charts for Horizontal Petroleum Storage Tanks Using Microsoft Excel. M�APAN-Journal of Metrology Society of India, 32 (4). pp. 321-327.

Akinnuli, B.O. and Agboola, O.O. and Ikubanni, P.P. (2017) DESIGN AND DEVELOPMENT OF AN UNMANNED SURVEILLANCE AERIAL VEHICLE (USAV) USING LOCALLY SOURCED MATERIAL. ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, 15 (3). pp. 27-32.

Agboola, O.O. and Ikubanni, P.P. (2017) APPLICATION OF STATISTICAL QUALITY CONTROL (SQC) IN THE CALIBRATION OF OIL STORAGE TANKS. Journal of Production Engineering, 20 (1). pp. 127-132.

Ikubanni, P.P. and Akande, K.A. and Agboola, O.O. (2017) Application of Anthropometric Approach in Lessening Disorders and Stress-Related Issues. Kathmandu University Journal of Science and Engineering (KUSET). (In Press)

ODEWOLE, M.M. and SUNMONU, M.O. and OYENIYI, S.K. and ADESOYE, O.A. and Ikubanni, P.P. (2017) DEVELOPMENT OF U-CHANNEL SCREW JACK FOR VEGETABLE OIL EXTRACTION. Nigerian Journal of Technology (NIJOTECH), 36 (3). pp. 979-986. ISSN 2467-8821

Akinnuli, B.O. and Agboola, O.O. and Ikubanni, P.P. (2017) Design and Development of an Unmanned Surveillance Aerial Vehicle (USAV) Using Locally Sourced Materials. UEM, 24 (1). pp. 18-32. ISSN ISSN 1453 - 7397

Ikubanni, P.P. and Komolafe, O.O. and Agboola, O.O. and Osueke, C.O. (2017) MORINGA SEED DEHULLING MACHINE: A NEW CONCEPTUAL DESIGN. Journal of Production Engineering, 20 (2). pp. 73-78.

Ikubanni, P.P. and Komolafe, O. O. and Agboola, O.O. and Osueke, C.O. (2017) MORINGA SEED DEHULLING MACHINE: A NEW CONCEPTUAL DESIGN. Journal of Production Engineering, 20 (2). pp. 73-78.

Ikubanni, P.P. and Adediran, A.A and Adeleke, Adekunle Akanni and Ajao, Kajogbola Rasaq and Agboola, O.O. (2017) Mechanical Properties Improvement Evaluation of Medium Carbon Steels Quenched in Different Media. International Journal of Engineering Research in Africa, 32. pp. 1-10. ISSN 1663-4144

Ikubanni, P.P. and Adediran, A.A and Adeleke, A.A. and Ajao, K. R. and Agboola, O.O. (2017) Mechanical Properties Improvement Evaluation of Medium Carbon Steels Quenched in Different Media. International Journal of Engineering Research in Africa, 32. pp. 1-10. ISSN ISSN: 1663-4144

Ikubanni, P.P. and Adediran, A.A and Adeleke, A.A. and Ajao, K.R. and Agboola, O.O. (2017) nical Properties Improvement Evaluation of Medium Carbon Steel Quenched in Different Media. International Journal of Engineering Research in Africa. (In Press)

Agboola, O.O. and Ikubanni, P.P. and Adediran, A.A and IBIKUNLE, R.A. and OGUNSEMI, B.T. (2016) Development of a WormCAD using Parametric Design Approach. ANALELE UNIVERSITĂŢII “EFTIMIE MURGU” REŞIŢA, XXIII. pp. 11-22. ISSN 1453 - 7397

Akinnuli, B.O. and AWOPETU, O.O. and Ikubanni, P.P. and Agboola, O.O. (2016) DEVELOPMENT OF PEDAL OPERATED HONEY EXTRACTOR. Bristish Journal of Applied Science and Technology, 16 (2). pp. 1-10. ISSN 2231-0843

Agboola, O.O. and Ikubanni, P.P. and Adediran, A.A and IBIKUNLE, R.A. and OGUNSEMI, B.T. (2016) DEVELOPMENT OF WORMCAD USING PARAMETRIC DESIGN APPROACH. ANALELE UNIVERSITATII "EFTIMIE MURGU" RESITA, 23 (1). pp. 11-22. ISSN 1453-7397

Akinnuli, B.O. and Awopetu, O.O. and Ikubanni, P.P. and Agboola, O.O. (2016) Development of Pedal Operated Honey Extractor. British Journal of Aplied Science and Technology, 16 (2). pp. 1-10. ISSN 2231-0843

Akinnuli, B.O. and Awopetu, O. O. and Ikubanni, P.P. and Agboola, O.O. (2016) Development of Pedal Operated Honey Extractor. British Journal of Applied Science & Technology, 16 (2). pp. 1-10. ISSN ISSN: 2231-0843

Agboola, O.O. and Ikubanni, P.P. and Adediran, A.A and IBIKUNLE, R.A. and OGUNSEMI, B.T. (2016) Development of a WormCAD using Parametric Design Approach. UEM, 23 (1). pp. 11-22. ISSN ISSN 1453 - 7397

Osueke, C.O. and Akinnuli, B.O. and Adediran, A.A and Ikubanni, P.P. and Agboola, O.O. (2015) An Algorithm of a Convectional Factory Electric Tray Dryer. The International Journal of Engineering and Science, 4 (6). pp. 17-25. ISSN 2319-1813

Akinnuli, B.O. and Osueke, C.O. and Ikubanni, P.P. and Agboola, O.O. and Adediran, A.A (2015) Design Concepts Towards Electric Powered Gari Frying Machine. International Journal of Scientific and Engineering Research, 6 (5). pp. 1043-1050. ISSN 2229-5518

Osueke, C.O. and Akinnuli, B.O. and Adediran, A.A and Ikubanni, P.P. and Agboola, O.O. (2015) An Algorithm of a Convectional Factory Electric Tray Dryer. The International Journal Of Engineering And Science (IJES), 4 (6). pp. 17-25.

Osueke, C.O. and Akinnuli, B.O. and Adediran, A.A and Ikubanni, P.P. and Agboola, O.O. (2015) An Algorithm of a Convectional Factory Electric Tray Dryer. The International Journal Of Engineering And Science (IJES), 4 (6). pp. 17-25. ISSN ISSN (e): 2319 – 1813 ISSN

Akinnuli, B.O. and Osueke, C.O. and Ikubanni, P.P. and Agboola, O.O. and Adediran, A.A (2015) DESIGN CONCEPTS TOWARDS ELECTRIC POWERED GARI FRYING MACHINE. International Journal of Scientific and Engineering Research, 6 (5). pp. 1043-1050. ISSN 2229-5518

Akinnuli, B.O. and Osueke, C.O. and Ikubanni, P.P. and Agboola, O.O. and Adediran, A.A (2015) Design Concepts Towards Electric Powered Gari Frying Machine. International Journal of Scientific & Engineering Research, 6 (5). pp. 1043-1050. ISSN ISSN 2229-5518

Ikubanni, P.P. and AKANDE, K.A. (2015) HAND INDEX CLASSIFICATIONS OF SOME SELECTED MALE IN ILORIN, NORTH CENTRAL NIGERIA. e-Journal of Science and Technology, 10 (1). pp. 65-69.

Akinnuli, B.O. and Agboola, O.O. and Ikubanni, P.P. (2015) PARAMETERS DETERMINATION USING COMPUTER AIDED DESIGN FOR BEVEL GEARS (CAD). British Journal of Mathematics and Computer Science, 9 (6). pp. 537-558. ISSN 2231-0851

Akinnuli, B.O. and Agboola, O.O. and Ikubanni, P.P. (2015) Parameters Determination for the Bevel Gears Using Computer Aided Design (Bevel CAD). British Journal of Mathematics and Computer Science, 9 (6). pp. 537-558. ISSN 2231-0851

Akinnuli, B.O. and Agboola, O.O. and Ikubanni, P.P. (2015) Parameters Determination for the Design of Bevel Gears Using Computer Aided Design (Bevel CAD). British Journal of Mathematics & Computer Science, 9 (6). pp. 537-558. ISSN ISSN: 2231-0851

Adeleke, A.A. and Odusote, J.K. and Ikubanni, P.P. and Orhadahwe, T. A. and Lasode, O. A. and Ammasi, A. and Kumar, K. Ash analyses of bio‑coal briquettes produced using blended binder. Scientific Reports, 11.

Akinnuli, B.O. and Agboola, O.O. and Ikubanni, P.P. Design and Development of an Unmanned Surveillance Aerial Vehicle (USAV) Using Locally Sourced Materials. ANALELE UNIVERSITĂŢII “EFTIMIE MURGU” REŞIŢA, 24 (1). pp. 18-32. ISSN ISSN 1453 - 7397

Ikubanni, P.P. and Adeleke, A.A. and OGUNSEMI, B.T. and IBIKUNLE, R.A. Fabrication and Evaluation of Screw-like Fish Pelletizer. Journal of Physics: Conference Series.

Ikubanni, P.P. and Oki, Makanjuola and Adeleke, A.A. and Adediran, A.A and Adesina, O. S. Influence of temperature on the chemical compositions and microstructural changes of ash formed from palm kernel shell. Results in Engineering, 8. pp. 1-9.

Adeleke, A.A. and Ikubanni, P.P. and Orhadahwe, T. A. and Christopher, C.T and Akano, J.M and Agboola, O.O. and Adegoke, Kayode Adesina and Balogun, Ayokunle O. and IBIKUNLE, R.A. Sustainability of multifaceted usage of biomass: A review. Heliyon.

Conference or Workshop Item

Akande, K.A. and Adegun, I.K and Awoyemi, A.O. and Ikubanni, P.P. (2013) Anthropometric Measurements Analysis of Ergonomic Chair Design for the Indigenous Weavers in Ilorin, Nigeria. In: Human factor, sustainable life and mobility, 16th - 18th October, 2013, Torino, Italy.

Dataset

Ikubanni, P.P. and Agboola, O.O. and Adediran, A.A and Adeleke, A.A. and OGUNSEMI, B.T. and Olabamiji, T.S. and Uguru-Okorie, D.C and Osueke, C.O. (2018) Experimental dataonmechanicalproperties evaluationofmediumcarbonsteelquenchedin differentwastemedia. [Dataset]

This list was generated on Fri Nov 22 21:34:48 2024 UTC.

Export as	Atom RSS 1.0 RSS 2.0