Browse by ["viewname_eprint_people" not defined]

Number of items: 56.

Atoyebi, O. D. and Afolayan, J. O. and Arum, C. Analysis and Interpretation of Structural Health Monitoring Data on Reinforced Concrete Buildings: A Critical Review. Journal of Engineering and Applied Sciences, 14 (24). pp. 9657-9666.

Atoyebi, O. D. and Awolusi, T. F. and Davies, I. E. E. (2018) Artificial neural network evaluation of cement-bonded particle board produced from red iron wood (Lophira alata) sawdust and palm kernel shell residues. Case Studies in Construction Materials, 30. pp. 1-11.

Atoyebi, O. D. and Awolusi, T. F. and Davies, I. E. E. (2018) Artificial neural network evaluation of cement-bonded particle board produced from red ironwood (Lophira alata) sawdust and palm kernel shell residues. Case Studies in Construction Materials, 9. ISSN 2214-5095

Ramonu, J.A. and Ilevbaoje, J.O. and Olaonipekun, O. A. and Sina-olulana, Opeyemi and Onikanni, D. and Adekunle, S. S. and Modupe, A. E. and Atoyebi, O. D. and Solomon, O. O. (2019) COMPRESSIVE STRENGTH ANALYSIS OF CONVENTIONAL DESIGN CONCRETE MIX RATIO; 1:2:4 AND NON-CONVENTIONAL CONCETE MIX RATIO; 1:3:3 FOR THE CONSTRUCTION INDUSTRY IN NIGERIA. International Journal of Civil Engineering and Technology, 10 (1). ISSN 1133-1141

Awolusi, T. F. and Oke, O.L. and Akinkurolere, O.O. and Atoyebi, O. D. (2018) Comparison of response surface methodology and hybrid-training approach of artificial neural network in modelling the properties of concrete containing steel fibre extracted from waste tyres. CIVIL & ENVIRONMENTAL ENGINEERING, 6.

Ramonu, John A. L. and Ilevbaoje, J. O. and Olaonipekun, O. A. and Sina-olulana, Opeyemi and Dotun, O. and Adekunle, S. S. and Modupe, A. E. and Atoyebi, O. D. and Solomon, O. O. (2019) Compressive strength analysis of conventional design concrete mix ratio; 1:2:4 and non-conventional concrete mix ratio; 1:3:3 for the construction industry in Nigeria. International Journal of Civil Engineering and Technology, 10 (12). pp. 1133-1141.

Modupe, A. E. and Atoyebi, O. D. and Basorun, A. O. and Gana, A. J. and Ramonu, John A. L. and Raphael, O. D. (2019) DEVELOPMENT AND PERFORMANCE EVALUATION OF CRUMB RUBBER –BIO-OIL MODIFIED HOT MIX ASPHALT FOR SUSTAINABLE HIGHWAY PAVEMENTS. International Journal of Mechanical Engineering and Technology (IJMET), 10 (2). pp. 273-287. ISSN 0976-6340; 0976-6359

Modupe, A. E. and Atoyebi, O. D. and Oluwatuyi, Opeyemi E. and Aladegboye, O. J. and Busari, A. and Basorun, A. O. (2018) Dataset of mechanical, marshall and rheological properties of crumb rubber – Bio-oil modified hot mix asphalt for sustainable pavement works. Data in brief, 21. pp. 63-70.

Atoyebi, O. D. and Modupe, A. E. and Aladegboye, O. J. and Odeyemi, S. V. (2018) Dataset of the density,water absorption and compressive strength of lateritic earth moist concrete. Data inBrief19(2018)2340–2343, 19. pp. 2340-2343.

Odeyemi, Samson Olalekan and Akinpelu, Mutiu Adelodun and Atoyebi, O. D. and Yahaya, Rukayah Titilope (2017) Determination of Load Carrying Capacity of Clay Bricks Reinforced With Straw. International Journal of Sustainable Construction Engineering & Technology, 8 (2). pp. 2180-3242.

Odeyemi, S. O. and Akinpelu, M. A. and Atoyebi, O. D. and Yahaya, Rukayah Titilope (2017) Determination of Load Carrying Capacity of Clay Bricks Reinforced With Straw. International Journal of Sustainable Construction Engineering & Technology, 8 (2). pp. 57-65. ISSN ISSN: 2180-3242

Atoyebi, O. D. and Aladegboye, O. J. and Odeyemi, S. V. (2018) EVALUATION OF LATERIZED EARTH MOIST CONCRETE IN CONSTRUCTION WORKS. International Journal of Civil Engineering and Technology, 9 (10). pp. 327-333. ISSN 0976-6316

Atoyebi, O. D. and Osueke, C.O. and Badiru, S. and Gana, A. J. and Ikpotokin, I. and Modupe, A. E. and Tegene, G. A. (2019) EVALUATION OF PARTICLE BOARD FROM SUGARCANE BAGASSE AND CORN COB. International Journal of Mechanical Engineering and Technology (IJMET), 10 (1). pp. 1193-1200. ISSN 0976-6340; 0976-6359

Odeyemi, S. O. and Abdulwahab, R. and Anifowose, M. A. and Atoyebi, O. D. Effect of Curing Methods on the Compressive Strengths of Palm Kernel Shell Concrete. Civil Engineering and Architecture, 9 (7). pp. 2286-2291.

Ajamu, S. O and Atoyebi, O. D. and Oyeboade, M. O. (2020) Effect of Epoxy-based Adhesives and Embedded Length in the Bond Strength of Post-installed Reinforcement in Concrete. International Journal of Engineering Research and Technology, 13 (3). pp. 477-483. ISSN 0974-3154

Odeyemi, S. O. and Atoyebi, O. D. and Ayo, E. K. (2020) Effect of Guinea Corn Husk Ash on the Mechanical Properties of Lateritic Concrete. IOP Conf. Series: Earth and Environmental Science, 445. pp. 1-12.

Atoyebi, O. D. and Orogbade, B. O. and Olayanju, T.M.A. and Okunola, Abiodun A. and Oyetayo, A. J. (2020) Effect of coir fibre and clayey soil on the strength of unglazed roofing tiles. IOP Conf. Series: Earth and Environmental Science, 445. pp. 1-5.

Adesina, A. and Atoyebi, O. D. (2020) Effect of crumb rubber aggregate on the performance of cementitious composites: A review. IOP Conf. Series: Earth and Environmental Science, 445. pp. 1-9.

Atoyebi, O. D. and Ikubanni, P. P. and Adesina, A. and Araoye, O. V. and Davies, I. E. E. and Cacciola, Pierfrancesco (2020) Effect of curing methods on the strength of interlocking paving blocks. Cogent Engineering, 7 (1). p. 1770914. ISSN 2331-1916

Gana, A. J. and Atoyebi, O. D. and Ichagba, R. B. Effect of different brands of Nigerian cement on the properties of pervious concrete. IOP Conf. Series: Earth and Environmental Science, 445 (2020). pp. 1-8.

Odeyemi, S. O. and Adisa, M. O. and Olaoye, A.P. and Atoyebi, O. D. and Wilson, U.N and Odeyemi, O. T. Effect of groundnut (Arachis hypogaea) shell ash on the properties of periwinkle shell, sawdust and cement‑bonded particle boards. Innovative Infrastructure Solutions, 8 (135).

Atoyebi, O. D. and Odeyemi, Samson O. and Orama, Joy A. (2018) Experimental data on the splitting tensile strength of bamboo reinforced lateritic concrete using different culm sizes. Data in Brief, 20. pp. 1960-1964.

Sadiq, Obanishola and Atoyebi, O. D. (2015) Flexural Strength Determination of Reinforced Concrete Elements With Waste Glass as Partial Replacement For Fine Aggregates. NSE Technical Transaction, 49 (2). pp. 74-81.

Odeyemi, S. O. and Atoyebi, O. D. and Odeyemi, O. T. and Ajamu, S. O Investigating the optimal combination for gravel and granite in blended palm oil fuel ash concrete. Innovative Infrastructure Solutions, 7 (343).

Odeyemi, S. O. and Atoyebi, O. D. and Kegbeyale, O. S. and Anifowose, M. A. and Odeyemi, O. T. and Adeniyi, A.G and Orisadare, O. A. (2021) Mechanical properties and microstructure of High-Performance Concrete with bamboo leaf ash as additive. Cleaner Engineering and Technology, 6.

Atoyebi, O. D. and Odeyemi, S. O. and Chiadighikaobi, P. C. and Gana, A. J. and Onyia, S. C. Mix ratio design assessment of interlocking paving stone using both destructive and non-destructive methods. Research on Engineering Structures & Materials, 9 (1). pp. 229-242.

Odeyemi, S. O. and Adisa, M. O. and Atoyebi, O. D. and Wilson, U. N. and Odeyemi, O. T. Optimal water-cement ratio and volume of superplasticizers for blended cement-bamboo leaf ash high-performance concrete. Research on Engineering Structures & Materials, 8 (3). pp. 569-581.

Modupe, A. E. and Olayanju, T.M.A. and Atoyebi, O. D. and Aladegboye, S. J. and Awolusi, T. F. and Busari, A. and Aderemi, P. O. and Modupe, O. C. (2019) Performance evaluation of hot mix asphaltic concrete incorporating cow bone ash (CBA) as partial replacement for filler. Materials Science and Engineering, 640.

Atoyebi, O. D. and Odeyemi, Samson O. and Azeez, Lateef O. and Modupe, A. E. (2019) Physical and Mechanical Properties Evaluation of Corncob and Sawdust Cement Bonded Ceiling Boards. International Journal of Engineering Research in Africa, 42. pp. 65-75. ISSN 1663-4144

Adediran, A.A and Atoyebi, O. D. and Adisa, C.O. (2018) Physical and Mechanical Properties Evaluation of Particle Board Produced From Saw Dust and Plastic Waste. International Journal of Engineering Research in Africa, 40. pp. 1-8.

Atoyebi, O. D. and Adediran, A.A and Adisa, C.O. (2018) Physical and Mechanical Properties Evaluation of Particle Board Produced From Saw Dust and Plastic Waste. International Journal of Engineering Research in Africa, 40. pp. 1-8. ISSN 1663-4144

Odeyemi, S. O. and Abdulwahab, R. and Adeniyi, A.G. and Atoyebi, O. D. (2020) Physical and mechanical properties of cement-bonded particle board produced from African balsam tree (Populous Balsamifera) and periwinkle shell residues. Results in Engineering, 6. pp. 1-12.

Atoyebi, O. D. and Aladegboye, O. J. and Fatoki, F. O. (2021) Physico-Mechanical Properties of Particle Board made from Coconut Shell, Coconut Husk and Palm Kernel Shell. In: International Conference on Engineering for Sustainable World (ICESW 2020), Covenant University, Ota.

Adediran, A.A and Olawale, O. and Ojediran, J. O. and Aladegboye, O. J. and Atoyebi, O. D. and Akinlabi, Esther Titilayo and Olayanju, T.M.A. (2019) Properties of agro-based hybrid particleboards. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing.

Odeyemi, S. O. and Akinpelu, M. A. and Atoyebi, O. D. and Orire, K.J. (2018) QUALITY ASSESSMENT OF SANDCRETE BLOCKS PRODUCED IN ADETA, KWARA STATE, NIGERIA. Nigerian Journal of Technology (NIJOTECH), 37 (1). pp. 53-59. ISSN 0331-8443

Odeyemi, S. O. and Akinpelu, M. A. and Atoyebi, O. D. and Orire, K. J. (2018) QUALITY ASSESSMENT OF SANDCRETE BLOCKS PRODUCED IN ADETA, KWARA STATE, NIGERIA. Nigerian Journal of Technology (NIJOTECH), 37 (1). pp. 53-59. ISSN 2467-8821

Odeyemi, S.O. and Akinpelu, M.A. and Atoyebi, O. D. and Orire, K.J. (2018) QUALITY ASSESSMENT OF SANDCRETE BLOCKS PRODUCED IN ADETA, KWARA STATE, NIGERIA. Nigerian Journal of Technology (NIJOTECH), 37 (1). pp. 53-59.

Odeyemi, S. O. and Atoyebi, O. D. and Ajamu, S. O. and Adesina, Adeyemi (2021) Relationship Between Compressive Strength and Splitting Tensile Strength of Palm Kernel Shell Concrete. LAUTECH Journal of Civil and Environmental Studies, 7 (2). pp. 111-118.

Atoyebi, O. D. and Ayanrinde, O. P. and Oluwafemi, J. (2019) Reliability Comparison of Schmidt Rebound Hammer as a Non- Destructive Test with Compressive Strength Tests for different Concrete Mix. Journal of Physics: Conference Series, 1378. pp. 1-10.

Aladegboye, O. J. and Opeyemi, D. A. and Atoyebi, O. D. and Akingbonmire, S. L. and Ibitogbe, E. M. (2020) Reliability analysis of reinforced concrete beam using varying properties. IOP Conf. Series: Earth and Environmental Science, 445. pp. 1-6.

Atoyebi, O. D. and Awolusi, T. F. and Odeyemi, S. O. and Aladegboye, O. J. and Gana, A. J. and Popoola, A. B. (2021) Response Surface Methodology and Statistical Investigation of the Strength of Bituminous Sandcrete Blocks. Civil Engineering and Architecture, 9 (5).

Atoyebi, O. D. and Odeyemi, Samson O. and Bello, Sefiu A. and Ogbeifun, Cephas O. (2018) SPLITTING TENSILE STRENGTH ASSESSMENT OF LIGHTWEIGHT FOAMED CONCRETE REINFORCED WITH WASTE TYRE STEEL FIBRES. International Journal of Civil Engineering and Technology (IJCIET), 9 (9). pp. 1129-1137. ISSN 0976-6316

Oluwafemi, J. and Ede, Anthony and Ofuyatan, Olatokunbo and Bankole, Deborah and Oyebisi, Solomon and Atoyebi, O. D. (2019) Seismic Retrofitting: A preparatory approach against the forecasted quakes in the South-Western Part of Nigeria. Journal of Physics: Conference Series, 1378. pp. 1-8.

Atoyebi, O. D. and Osuolale, O. M. and Ibitogbe, E. M. (2019) Strength Evaluation of Cocos nucifera Fibre Reinforced Concrete. Journal of Engineering and Applied Sciences, 14 (21). pp. 8061-8066. ISSN 1816-949X

Odeyemi, S. O. and Abdulwahab, R. and Akinpelu, M. A. and Afolabi, R. and Atoyebi, O. D. (2022) Strength Properties of Steel and Bamboo Reinforced Concrete Containing Quarry Dust, Rice Husk Ash and Guinea Corn Husk Ash. Iranian (Iranica) Journal of Energy & Environment, 13 (4). pp. 354-362.

Atoyebi, O. D. and Odeyemi, S. O. and Ndubuisi, B. O Strength and Durability Assessment of Low Water Absorption Glasscrete Blocks for Zero-Spalling Effect in Buildings. In: 2023 International Conference on Science, Engineering and Business for Sustainable Development Goals (SEB-SDG), Landmark University, Omuaran Nigeria.

Atoyebi, O. D. and Orogbade, B. O. and Aladegboye, O. J. and Adebiyi, J. A. (2021) Strength evaluation of agro waste particle board with melted pure water sachet as the binding agent. In: ICSID 2020, Covenant University, Ota.

Odeyemi, S. O. and Akinpelu, M. A. and Atoyebi, O. D. and Ismail, A. A. (2018) Time History Analysis of a Steel Water Tank with Pinned and Fixed Foundations under Varying Ground Perturbations. NIGERIAN JOURNAL OF TECHNOLOGICAL DEVELOPMENT, 15 (2). pp. 50-56.

Atoyebi, O. D. and Olayanju, T.M.A. and Modupe, A. E. and Jegede, S. L. (2019) Traffic Flow Characteristics Modelling of a Central Business District – Case Study of Challenge Area, Ibadan, Nigeria. International Journal of Engineering Research and Technology., 12 (12). pp. 2894-2902. ISSN 0974-3154

Atoyebi, O. D. and Jegede, S. L. and Olayanju, T.M.A. (2020) A descriptive and inferential analysis of on-street parking volume in Nigeria –A case study of Ibadan. IOP Conf. Series: Earth and Environmental Science, 445. pp. 1-12.

This list was generated on Wed May 14 15:03:55 2025 UTC.

Export as	Atom RSS 1.0 RSS 2.0