Items where Author is "Atoyebi, O. D."

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 29.

Article

Atoyebi, O. D. and Orogbade, B. O. and Olayanju, T.M.A. and Okunola, Abiodun A. and Oyetayo, A. J. (2020) Effect of coir fibre and clayey soil on the strength of unglazed roofing tiles. IOP Conf. Series: Earth and Environmental Science, 445. pp. 1-5.

Atoyebi, O. D. and Jegede, S. L. and Olayanju, T.M.A. (2020) A descriptive and inferential analysis of on-street parking volume in Nigeria –A case study of Ibadan. IOP Conf. Series: Earth and Environmental Science, 445. pp. 1-12.

Modupe, A. E. and Atoyebi, O. D. and Basorun, A. O. and Gana, A. J. and Ramonu, John A. L. and Raphael, O. D. (2019) DEVELOPMENT AND PERFORMANCE EVALUATION OF CRUMB RUBBER –BIO-OIL MODIFIED HOT MIX ASPHALT FOR SUSTAINABLE HIGHWAY PAVEMENTS. International Journal of Mechanical Engineering and Technology (IJMET), 10 (2). pp. 273-287. ISSN 0976-6340; 0976-6359

Ramonu, J.A. and Ilevbaoje, J.O. and Olaonipekun, O. A. and Sina-olulana, Opeyemi and Onikanni, D. and Adekunle, S. S. and Modupe, A. E. and Atoyebi, O. D. and Solomon, O. O. (2019) COMPRESSIVE STRENGTH ANALYSIS OF CONVENTIONAL DESIGN CONCRETE MIX RATIO; 1:2:4 AND NON-CONVENTIONAL CONCETE MIX RATIO; 1:3:3 FOR THE CONSTRUCTION INDUSTRY IN NIGERIA. International Journal of Civil Engineering and Technology, 10 (1). ISSN 1133-1141

Ramonu, John A. L. and Ilevbaoje, J. O. and Olaonipekun, O. A. and Sina-olulana, Opeyemi and Dotun, O. and Adekunle, S. S. and Modupe, A. E. and Atoyebi, O. D. and Solomon, O. O. (2019) Compressive strength analysis of conventional design concrete mix ratio; 1:2:4 and non-conventional concrete mix ratio; 1:3:3 for the construction industry in Nigeria. International Journal of Civil Engineering and Technology, 10 (12). pp. 1133-1141.

Atoyebi, O. D. and Osueke, C.O. and Badiru, S. and Gana, A. J. and Ikpotokin, I. and Modupe, A. E. and Tegene, G. A. (2019) EVALUATION OF PARTICLE BOARD FROM SUGARCANE BAGASSE AND CORN COB. International Journal of Mechanical Engineering and Technology (IJMET), 10 (1). pp. 1193-1200. ISSN 0976-6340; 0976-6359

Modupe, A. E. and Olayanju, T.M.A. and Atoyebi, O. D. and Aladegboye, S. J. and Awolusi, T. F. and Busari, A. and Aderemi, P. O. and Modupe, O. C. (2019) Performance evaluation of hot mix asphaltic concrete incorporating cow bone ash (CBA) as partial replacement for filler. Materials Science and Engineering, 640.

Adediran, A.A and Atoyebi, O. D. and Adisa, C.O. (2018) Physical and Mechanical Properties Evaluation of Particle Board Produced From Saw Dust and Plastic Waste. International Journal of Engineering Research in Africa, 40. pp. 1-8.

Atoyebi, O. D. and Awolusi, T. F. and Davies, I. E. E. (2018) Artificial neural network evaluation of cement-bonded particle board produced from red iron wood (Lophira alata) sawdust and palm kernel shell residues. Case Studies in Construction Materials, 30. pp. 1-11.

Atoyebi, O. D. and Awolusi, T. F. and Davies, I. E. E. (2018) Artificial neural network evaluation of cement-bonded particle board produced from red ironwood (Lophira alata) sawdust and palm kernel shell residues. Case Studies in Construction Materials, 9. ISSN 2214-5095

Awolusi, T. F. and Oke, O.L. and Akinkurolere, O.O. and Atoyebi, O. D. (2018) Comparison of response surface methodology and hybrid-training approach of artificial neural network in modelling the properties of concrete containing steel fibre extracted from waste tyres. CIVIL & ENVIRONMENTAL ENGINEERING, 6.

Modupe, A. E. and Atoyebi, O. D. and Oluwatuyi, Opeyemi E. and Aladegboye, O. J. and Busari, A. and Basorun, A. O. (2018) Dataset of mechanical, marshall and rheological properties of crumb rubber – Bio-oil modified hot mix asphalt for sustainable pavement works. Data in brief, 21. pp. 63-70.

Atoyebi, O. D. and Modupe, A. E. and Aladegboye, O. J. and Odeyemi, S. V. (2018) Dataset of the density,water absorption and compressive strength of lateritic earth moist concrete. Data inBrief19(2018)2340–2343, 19. pp. 2340-2343.

Atoyebi, O. D. and Aladegboye, O. J. and Odeyemi, S. V. (2018) EVALUATION OF LATERIZED EARTH MOIST CONCRETE IN CONSTRUCTION WORKS. International Journal of Civil Engineering and Technology, 9 (10). pp. 327-333. ISSN 0976-6316

Atoyebi, O. D. and Odeyemi, Samson O. and Orama, Joy A. (2018) Experimental data on the splitting tensile strength of bamboo reinforced lateritic concrete using different culm sizes. Data in Brief, 20. pp. 1960-1964.

Atoyebi, O. D. and Adediran, A.A and Adisa, C.O. (2018) Physical and Mechanical Properties Evaluation of Particle Board Produced From Saw Dust and Plastic Waste. International Journal of Engineering Research in Africa, 40. pp. 1-8. ISSN 1663-4144

Odeyemi, S. O. and Akinpelu, M. A. and Atoyebi, O. D. and Orire, K.J. (2018) QUALITY ASSESSMENT OF SANDCRETE BLOCKS PRODUCED IN ADETA, KWARA STATE, NIGERIA. Nigerian Journal of Technology (NIJOTECH), 37 (1). pp. 53-59. ISSN 0331-8443

Odeyemi, S. O. and Akinpelu, M. A. and Atoyebi, O. D. and Orire, K. J. (2018) QUALITY ASSESSMENT OF SANDCRETE BLOCKS PRODUCED IN ADETA, KWARA STATE, NIGERIA. Nigerian Journal of Technology (NIJOTECH), 37 (1). pp. 53-59. ISSN 2467-8821

Odeyemi, S.O. and Akinpelu, M.A. and Atoyebi, O. D. and Orire, K.J. (2018) QUALITY ASSESSMENT OF SANDCRETE BLOCKS PRODUCED IN ADETA, KWARA STATE, NIGERIA. Nigerian Journal of Technology (NIJOTECH), 37 (1). pp. 53-59.

Atoyebi, O. D. and Odeyemi, Samson O. and Bello, Sefiu A. and Ogbeifun, Cephas O. (2018) SPLITTING TENSILE STRENGTH ASSESSMENT OF LIGHTWEIGHT FOAMED CONCRETE REINFORCED WITH WASTE TYRE STEEL FIBRES. International Journal of Civil Engineering and Technology (IJCIET), 9 (9). pp. 1129-1137. ISSN 0976-6316

Odeyemi, S. O. and Akinpelu, M. A. and Atoyebi, O. D. and Ismail, A. A. (2018) Time History Analysis of a Steel Water Tank with Pinned and Fixed Foundations under Varying Ground Perturbations. NIGERIAN JOURNAL OF TECHNOLOGICAL DEVELOPMENT, 15 (2). pp. 50-56.

Odeyemi, S. O. and Akinpelu, M. A. and Atoyebi, O. D. and Ismail, A. A. (2018) Time History Analysis of a Steel Water Tank with Pinned and Fixed Foundations under Varying Ground Perturbations. NIGERIAN JOURNAL OF TECHNOLOGICAL DEVELOPMENT, 15 (2). pp. 50-56.

Odeyemi, S. O. and Akinpelu, M. A. and Atoyebi, O. D. and Ismail, A. A. (2018) Time History Analysis of a Steel Water Tank with Pinned and Fixed Foundations under Varying Ground Perturbations. NIGERIAN JOURNAL OF TECHNOLOGICAL DEVELOPMENT, 15 (2). pp. 50-56.

Odeyemi, Samson Olalekan and Akinpelu, Mutiu Adelodun and Atoyebi, O. D. and Yahaya, Rukayah Titilope (2017) Determination of Load Carrying Capacity of Clay Bricks Reinforced With Straw. International Journal of Sustainable Construction Engineering & Technology, 8 (2). pp. 2180-3242.

Odeyemi, S. O. and Akinpelu, M. A. and Atoyebi, O. D. and Yahaya, Rukayah Titilope (2017) Determination of Load Carrying Capacity of Clay Bricks Reinforced With Straw. International Journal of Sustainable Construction Engineering & Technology, 8 (2). pp. 57-65. ISSN ISSN: 2180-3242

Odeyemi, Samson Olalekan and Akinpelu, Mutiu Adelodun and Atoyebi, O. D. and Yahaya, Rukayah Titilope (2017) Determination of Load Carrying Capacity of Clay Bricks Reinforced With Straw. International Journal of Sustainable Construction Engineering & Technology, 8 (2). pp. 57-61. ISSN ISSN: 2180-3242

Odeyemi, Samson Olalekan and Akinpelu, Mutiu Adelodun and Atoyebi, O. D. and Yahaya, Rukayah Titilope (2017) Determination of Load Carrying Capacity of Clay Bricks Reinforced With Straw. International Journal of Sustainable Construction Engineering & Technology, 8 (2). pp. 57-65. ISSN 2180-3242

Sadiq, Obanishola and Atoyebi, O. D. (2015) Flexural Strength Determination of Reinforced Concrete Elements With Waste Glass as Partial Replacement For Fine Aggregates. NSE Technical Transaction, 49 (2). pp. 74-81.

Conference or Workshop Item

Adediran, A.A and Olawale, O. and Ojediran, J. O. and Aladegboye, O. J. and Atoyebi, O. D. and Akinlabi, Esther Titilayo and Olayanju, T.M.A. (2019) Properties of agro-based hybrid particleboards. In: 2nd International Conference on Sustainable Materials Processing and Manufacturing.

This list was generated on Sat Sep 26 06:18:43 2020 WAT.