 | Up a level |
Adeleke, A.A. and Odusote, J.K. and Ikubanni, P.P. and Orhadahwe, T. A. and Lasode, O. A. and Ammasi, A. and Kumar, K. Ash analyses of bio‑coal briquettes produced using blended binder. Scientific Reports, 11.
Odusote, J.K. and Shittu, Wasiu and Adeleke, A.A. and Ikubanni, P.P. and Adeyemo, O. (2019) Chemical and Mechanical Properties of Reinforcing Steel Bars from Local Steel Plants. pp. 229-309. ISSN doi: 10.1007/s11668-019-00695-x
Adeleke, A.A. and Odusote, J.K. and Ikubanni, P.P. and Lasode, O.A. L and Agboola, O.O. and Ammasi, A. and Ajao, K.R. (2018) Dataset on the evaluation of chemical and mechanical properties of steel rods from local steel plants and collapsed building sites. Data in Brief, 21. pp. 1552-1557.
Adeleke, A.A. and Odusote, J.K. and Lasode, O. A. and Ikubanni, P.P. and Malathi, M. and Paswan, D. (2019) Densification of coal fines and mildly torrefied biomass into composite fuel using different organic binders. Heliyon, 5. ISSN 2405-8440
Ohijeagbon, I.O. and Adeleke, A.A. and Mustapha, V.T. and Olorunmaiye, J.A. and Okokpujie, I.P. and Ikubanni, P.P. (2020) Development and characterization of wood-polypropylene plastic-cement composite board. Case Studies in Construction Materials, 8. pp. 1-8.
Adesina, O. S. and Oki, Makanjuola and Farotade, G. A. and Adesina, O. T. and Ogunbiyi, O. F. and Adeleke, A.A. (2020) Effect of nickel-based laser coatings on phase composition and corrosion behaviour of titanium alloy for offshore application. Materias tiday Proceedings.
Adeleke, A.A. and Odusote, J.K. and Ikubanni, P.P. and Lasode, O. A. and Malathi, M. and Paswan, D. (2020) Essential basics on biomass torrefaction, densificationand utilization. International Journal of Energy Research. pp. 1-12.
IBIKUNLE, R.A. and Akintunde, Mutalubi Aremu and Titiladunayo, I.F. and Adeleke, A.A. Estimation of coefficient of performance of thermoelectric cooler using a 30 W single-stage type. International Review of Applied Sciences and Engineering.
Orhadahwe, T. A. and Adeleke, A.A. and Ikubanni, P.P. and Agboola, O.O. (2020) Evaluating the Effectiveness of Maintenance Practice: Case Study of a University Power Generating Plant Unit. Engineering and Applied Science Research, 47 (2). pp. 170-174.
Adeleke, A.A. and Odusote, J.K. and Lasode, O. A. and Ikubanni, P.P. and Madhurai, M. and Paswan, D. (2019) Evaluation of thermal decomposition characteristics and kinetic parameters of melina wood. Biofuels Journals. ISSN 1759-7269 (Print) 1759-7277 (Online
Ikubanni, P.P. and Agboola, O.O. and Adediran, A.A and Adeleke, A.A. and OGUNSEMI, B.T. and Olabamiji, T.S. and Uguru-Okorie, D.C and Osueke, C.O. (2018) Experimental dataonmechanicalproperties evaluationofmediumcarbonsteelquenchedin differentwastemedia. [Dataset]
Ikubanni, P.P. and Adeleke, A.A. and OGUNSEMI, B.T. and IBIKUNLE, R.A. Fabrication and Evaluation of Screw-like Fish Pelletizer. Journal of Physics: Conference Series.
Mwema, Fredrick M. and Adediran, A.A and Akinlabi, Esther Titilayo and Adeleke, A.A. and Olayanju, T.M.A. (2021) Fractal characterization of conductive Ag/flexible 3D printed PLA. IOP Conference Series: Materials Science and Engineering, 1107. 012050.
Mwema, Fredrick M. and Adediran, A.A and Akinlabi, Esther Titilayo and Adeleke, A.A. and Olayanju, T.M.A. (2021) Fractal characterization of conductive Ag/flexible 3D printed PLA. IOP Conference Series: Materials Science and Engineering, 1107 (1). 012050. ISSN 1757-8981
Ikubanni, P.P. and Oki, Makanjuola and Adeleke, A.A. and Adediran, A.A and Adesina, O. S. Influence of temperature on the chemical compositions and microstructural changes of ash formed from palm kernel shell. Results in Engineering, 8. pp. 1-9.
Ikubanni, P.P. and Adediran, A.A and Adeleke, A.A. and Ajao, K. R. and Agboola, O.O. (2017) Mechanical Properties Improvement Evaluation of Medium Carbon Steels Quenched in Different Media. International Journal of Engineering Research in Africa, 32. pp. 1-10. ISSN ISSN: 1663-4144
Ikubanni, P.P. and Adediran, A.A and Adeleke, A.A. and Ajao, K. R. and Agboola, O.O. (2017) Mechanical Properties Improvement Evaluation of Medium Carbon Steels Quenched in Different Media. International Journal of Engineering Research in Africa, 32. pp. 1-10. ISSN 1663-4144
Ikubanni, P.P. and Adediran, A.A and Adeleke, A.A. and Ajao, K.R. and Agboola, O.O. (2017) Mechanical Properties Improvement Evaluation of Medium Carbon Steel Quenched in Different Media. International Journal of Engineering Research in Africa, 32. pp. 1-10.
Adeleke, A.A. and Odusote, J.K. and Olasode, O.A. and Ikubanni, P.P. and Malathi, M. and Paswan, D. (2019) Mild pyrolytic treatment of Gmelina arborea for optimum energetic yields. MATERIALS ENGINEERING, 6.
Agboola, O.O. and Ikubanni, P.P. and Adeleke, A.A. and Adediran, A.A and Adesina, O. S. and Aliyu, S.J (2020) Optimization of heat treatment parameters of medium carbon steel quenched in different media using Taguchi method and grey relational analysis. Heliyon, 6. ISSN 04444
Agboola, O.O. and Ikubanni, P.P. and Adeleke, A.A. and Adediran, A.A. and Adesina, O.S. and Aliyu, S.J. and Olabamiji, T.S. (2020) Optimization of heat treatment parameters of medium carbon steel quenched in different media using Taguchi method and grey relational analysis. Heliyon, 6 (7). e04444. ISSN 24058440
Ohijeagbon, I.O. and Bello-Ochende, M.U. and Adeleke, A.A. and Ikubanni, P.P. and Samuel, A.A. and Lasode, O.A. and Atoyebi, O.D. (2021) Physico-mechanical properties of cement bonded ceiling board developed from teak and African locust bean tree wood residue. Materials Today: Proceedings, 44. pp. 2865-2873. ISSN 22147853
Ikubanni, P.P. and Adeleke, A.A. and Adediran, A.A and Agboola, O.O. (2018) Physico-mechanical properties of particle boards produced from locally sourced materials. International Journal of Scientific Research in Africa, 39. pp. 112-118.
Adekunle, A. S. and Adeleke, A.A. and Sam Obu, C. V. and Ikubanni, P.P. and Ibitoye, S. E. and Azeez, T. M. (2020) Recycling of plastics with compatibilizer as raw materials for the production of automobile bumper. Cogent Engineering, 7 (1). pp. 1-14.
Adeleke, A.A. and Ikubanni, P.P. and Orhadahwe, T. A. and Christopher, C.T and Akano, J.M and Agboola, O.O. and Adegoke, Kayode Adesina and Balogun, Ayokunle O. and IBIKUNLE, R.A. Sustainability of multifaceted usage of biomass: A review. Heliyon.
Ikubanni, P.P. and Oki, Makanjuola and Adeleke, A.A. and Omoniyi, P.O. (2021) Synthesis, physico‑mechanical and microstructural characterization ofAl6063/SiC/ PKSA hybrid reinforced composites. Scientific Reports, 11.
Adeleke, A.A. and Ikubanni, P.P. and Adediran, A.A and Agboola, O.O. and Olabamiji, T.S. and Ogunsola, O. and Ibeawuchi, C. (2018) TENSILE STRENGTH AND MICROSTRUCTURAL BEHAVIOUR OF MEDIUM CARBON STEEL QUENCHED IN SOME SELECTED MEDIA. International Journal of Civil Engineering and Technology, 9 (10). 2148 -2156.
Adeleke, A.A. and Odusote, J.K. and Ikubanni, P.P. and Lasode, O. A. and Malathi, M. and Paswan, D. (2020) The ignitability, fuel ratio and ash fusion temperatures of torrefied woody biomass. Heliyon, 6. pp. 1-7.
Ikubanni, P.P. and Adediran, A.A and Adeleke, A.A. and Ajao, K.R. and Agboola, O.O. (2017) nical Properties Improvement Evaluation of Medium Carbon Steel Quenched in Different Media. International Journal of Engineering Research in Africa. (In Press)
Ikubanni, P.P. and Oki, Makanjuola and Adeleke, A.A. (2020) A review of ceramic/bio-based hybrid reinforced aluminium matrix composites. Cogent Engineering, 7 (1). pp. 1-19.
