 | Up a level |
Raphael, O. D. and Akinyemi, Banjo and OGUNSEMI, B.T. and Ogundipe, S. J. and Abayomi, S. T. (2019) Modeling and optimization of silica production from maize husk. International Journal of Mechanical Engineering and Technology (IJMET), 10 (1). pp. 755-764. ISSN 0976-6340; 0976-6359
Adediran, A.A and Oki, Makanjuola and Akintola, Sarah Abidemi and OGUNSEMI, B.T. and Akinlabi, Esther Titilayo (2019) ELECTRON-OPTICAL AND AUGER ELECTRON SPECTROSCOPY STUDIES OF A ZIRCONIUM CONVERSION COATING ON ALUMINIUM. Materials and technology, 53 (2). pp. 183-188. ISSN 1580-2949
OGUNSEMI, B.T. and Ikubanni, P.P. and Adediran, A.A and Agboola, O.O. (2019) Effect of stand‑off height on the shear strength of ball grid array solder joints under varying pad sizes. SN Applied Sciences A SPRINGER NATURE Journal.
Akintola, Sarah Abidemi and Oki, Makanjuola and Aleem, A.A. and Adediran, A.A and Akpor, O.B. and Oluba, Olarewaju M. and OGUNSEMI, B.T. and Ikubanni, P.P. (2019) Valorized chicken feather as corrosion inhibitor for mild steel in drilling mud. Results in Engineering, 4. ISSN 2590-1230
IBIKUNLE, R.A. and Ikubanni, P.P. and Agboola, O.O. and OGUNSEMI, B.T. (2018) Development and performance evaluation of palm nut cracker. Leonardo Electronic Journal of Practices and Technologies (33). pp. 219-234. ISSN 1583-1078
IBIKUNLE, R.A. and Titiladunayo, I.F. and Akinnuli, B.O. and Agboola, O.O. and OGUNSEMI, B.T. (2018) Analysis of combustible municipal solid waste fractions as fuel for energy production exploring its physico-chemical and thermal characteristics. International Journal of Civil Engineering and Technology, 9 (13). pp. 1557-1575. ISSN 0976-6308
Olawale, O. and OGUNSEMI, B.T. and Agboola, O.O. and Ake, Modupe and Jawando, G.O (2018) INHIBITION EFFECT OF ORANGE SEED EXTRACT ON ALUMINIUM CORROSION IN 1M HYDROCHLORIC ACID SOLUTION. International Journal of Mechanical Engineering and Technology (IJMET), 9 (12). pp. 282-287. ISSN ISSN Print: 0976-6340 and ISSN Online: 0976-6359
OGUNSEMI, B.T. and Ikubanni, P.P. and Agboola, O.O. and Adediran, A.A and Olawale, O. and IBIKUNLE, R.A. and Ake, Modupe and Oki, Makanjuola (2018) INVESTIGATIVE STUDY OF THE EFFECTS OF CERTAIN ADDITIVES ON SOME SELECTED REFRACTORY PROPERTIES OF ANT-HILL CLAY FOR FURNACE LINING. International Journal of Civil Engineering and Technology (IJCIET), 12. pp. 761-772. ISSN Print: 0976-6308 and ISSN Online: 0976-6316
Agboola, O.O. and Ikubanni, P.P. and OGUNSEMI, B.T. and IBIKUNLE, R.A. and Adediran, A.A and Kareem, B. (2018) Dataset for the development of a diagnostic schedule for a defective LC-195V5 CNC milling machine at FUTA central workshop. ELSEVIER. pp. 2352-3409.
Agboola, O.O. and Ikubanni, P.P. and OGUNSEMI, B.T. and IBIKUNLE, R.A. and Adediran, A.A and Kareem, B. and Akinnuli, B.O. and Osueke, C.O. (2018) Dataset for the development of a diagnostic schedule for a defective LC-195V5 CNC milling machine at FUTA central workshop. Data in Brief, 21. 1496 -1503.
Olawale, O. and Idefoh, C.K and OGUNSEMI, B.T. and Bello, J. O. (2018) EVALUATION OF GROUNDNUT LEAVES EXTRACT AS CORROSION INHIBITOR ON MILD STEEL IN 1M SULPHURIC ACID USING RESPONSE SURFACE METHODOLOGY (RSM). International Journal of Mechanical Engineering and Technology (IJMET), 9 (11). pp. 829-841. ISSN ISSN Print: 0976-6340 and ISSN Online: 0976-6359
Elemile, Olugbenga O. and OGUNSEMI, B.T. and Sridhar, M.K.C and Coker, A. O. and Akinola, O.O. (2018) Performance assessment of a carbon dioxide extractor in a solid waste management facility in Akure, Nigeria. International Journal of Civil Engineering and Technology (IJCIET), 9 (11). pp. 1252-1268. ISSN ISSN Print: 0976-6308 and ISSN Online: 0976-6316
Ikubanni, P.P. and Agboola, O.O. and Adediran, A.A and Adeleke, A.A. and OGUNSEMI, B.T. and Olabamiji, T.S. and Uguru-Okorie, D.C and Osueke, C.O. (2018) Experimental dataonmechanicalproperties evaluationofmediumcarbonsteelquenchedin differentwastemedia. [Dataset]
Oki, Makanjuola and Adediran, A.A and OGUNSEMI, B.T. and Akintola, Sarah Abidemi and Charles, Ebitei (2018) Conversion Coating Pretreatment Enhances Pipeline Integrity. American Journal of Chemistry and Applications 2018; 5(3): 53-56, 5 (3). pp. 53-56. ISSN 2381-4535
Oki, Makanjuola and Adediran, A.A and OGUNSEMI, B.T. and Agboola, O.O. and Olayinka, Saheed and Ogunsola, O. (2018) Improvement in Corrosion Resistance of Aluminium Alloy by Permanganate-based Conversion Coating. Journal of Physical Science, 29 (2). pp. 13-24.
Oki, Makanjuola and Adediran, A.A and OGUNSEMI, B.T. and Agboola, O.O. and Olayinka, Saheed and Ogunsola, Oyeyemi (2018) Improvement in Corrosion Resistance of Aluminium Alloy by Permanganate-based Conversion Coating. Journal of Physical Science, 29 (2). pp. 13-24.
Olawale, O. and OGUNSEMI, B.T. and Abayomi, S. J. and Uguru-Okorie, D.C and Okunola, Abiodun A. and Oni, S. O. and Kolawole, O. D. and Ikpotokin, I. (2018) Optimization of Katemfe Seed Extract as A Corrosion Inhibitor for Mild-Steel in 0.5M Hcl. International Journal of Civil Engineering and Technology, 9 (13). pp. 1394-1402.
Agboola, O.O. and Ikubanni, P.P. and IBIKUNLE, R.A. and Adediran, A.A and OGUNSEMI, B.T. (2017) Generation of Calibration Charts for Horizontal Petroleum Storage Tanks Using Microsoft Excel. M�APAN-Journal of Metrology Society of India, 32 (4). pp. 321-327.
Agboola, O.O. and Ikubanni, P.P. and IBIKUNLE, R.A. and Adediran, A.A and OGUNSEMI, B.T. (2017) Generation of Calibration Charts for Horizontal Petroleum Storage Tanks Using Microsoft Excel. M�APAN-Journal of Metrology Society of India.
Agboola, O.O. and Ikubanni, P.P. and IBIKUNLE, R.A. and Adediran, A.A and OGUNSEMI, B.T. (2017) Generation of Calibration Charts for Horizontal Petroleum Storage Tanks Using Microsoft Excel. M�APAN-Journal of Metrology Society of India, - (-).
Agboola, O.O. and Ikubanni, P.P. and IBIKUNLE, R.A. and Adediran, A.A and OGUNSEMI, B.T. (2017) Generation of Calibration Charts for Horizontal Petroleum Storage Tanks Using Microsoft Excel. M_APAN-Journal of Metrology Society of India.
Agboola, O.O. and Ikubanni, P.P. and Adediran, A.A and IBIKUNLE, R.A. and OGUNSEMI, B.T. (2016) Development of a WormCAD using Parametric Design Approach. ANALELE UNIVERSITĂŢII “EFTIMIE MURGU” REŞIŢA, XXIII. pp. 11-22. ISSN 1453 - 7397
Agboola, O.O. and Ikubanni, P.P. and Adediran, A.A and IBIKUNLE, R.A. and OGUNSEMI, B.T. (2016) DEVELOPMENT OF WORMCAD USING PARAMETRIC DESIGN APPROACH. ANALELE UNIVERSITATII "EFTIMIE MURGU" RESITA, 23 (1). pp. 11-22. ISSN 1453-7397
Agboola, O.O. and Ikubanni, P.P. and Adediran, A.A and IBIKUNLE, R.A. and OGUNSEMI, B.T. (2016) Development of a WormCAD using Parametric Design Approach. ANALELE UNIVERSITĂŢII “EFTIMIE MURGU” REŞIŢA, 23 (1). pp. 11-22. ISSN ISSN 1453 - 7397
Agboola, O.O. and Ikubanni, P.P. and Adediran, A.A and IBIKUNLE, R.A. and OGUNSEMI, B.T. (2016) Development of a WormCAD using Parametric Design Approach. UEM, 23 (1). pp. 11-22. ISSN ISSN 1453 - 7397
Ikubanni, P.P. and Adeleke, A.A. and OGUNSEMI, B.T. and IBIKUNLE, R.A. Fabrication and Evaluation of Screw-like Fish Pelletizer. Journal of Physics: Conference Series.
Oki, Makanjuola and Adediran, A.A and OGUNSEMI, B.T. and Agboola, O.O. and Olayinka, Saheed and Ogunsola, O. Improvement in Corrosion Resistance of Aluminium Alloy by Permanganate-based Conversion Coating. Journal of Physical Science, 29 (2). pp. 13-24.
OGUNSEMI, B.T. and Abioye, T.E and Orekunrin, T.M and Oladimeji, P.O and Jamiu, R.B and Ogedengbe, T.I Joint quality enhancement of AA6061-T6 friction stir weldment by reinforcing with pulverized glass waste using different reinforcement strategies. Engineering Research Express.
