 | Up a level |
Adediran, A.A EFFECT OF GUINEA CORN HUSK ASH ON THE MECHANICAL PROPERTIES AND WEAR BEHAVIOUR OF EPOXY MATRIX COMPOSITES. International Journal of Civil Engineering and Technology (IJCIET), 9 (11). pp. 1207-1216.
Adediran, A.A Evaluation of the mechanical properties and corrosion behaviour of coconut shell ash reinforced aluminium (6063) alloy composites. Leonardo Electronic Journal of Practices and Technologies, 14 (26). pp. 107-119. ISSN 1583-1078
Adediran, A.A (2015) Mechanical properties of dual phase steel quenched in bitumen medium. Leonardo Electronic Journal of Practices and Technologies, 14 (26). pp. 1-6. ISSN ISSN 1583-1078
Adediran, A.A. and Alaneme, K.K. and Oladele, I.O. and Akinlabi, E.T. (2018) Processing and structural characterization of Si-based carbothermal derivatives of rice husk. Cogent Engineering, 5 (1). pp. 1-12.
Adediran, A.A. and Balogun, O.A. and Akinwande, A.A. and Adesina, O.S. and Olasoju, O.S. (2020) Influence of chemical treatment on the properties of cement-paper hybrid composites for ceiling board application. Heliyon, 6 (7). e04512.
Adediran, Adeolu A. and Akinwande, Abayomi A. and Balogun, Oluwatosin A. and Bello, Oladele S. and Akinbowale, Miracle K. and Adesina, Olanrewaju S. and Ojo, Ayotunde A. (2022) Mechanical and optimization studies of polypropylene hybrid biocomposites. Scientific Reports, 12 (1).
Adediran, Adeolu A. and Akinwande, Abayomi A. and Balogun, Oluwatosin A. and Olasoju, O. S. and Adesina, Olanrewaju S. (2021) Experimental evaluation of bamboo fiber/particulate coconut shell hybrid PVC composite. Scientific Reports, 11 (1).
Adediran, Adeolu A. and Akinwande, Abayomi A. and Balogun, Oluwatosin A. and Olorunfemi, Bayode J. and M., Saravana Kumar (2021) Optimization studies of stir casting parameters and mechanical properties of TiO2 reinforced Al 7075 composite using response surface methodology. Scientific Reports, 11 (1).
Adediran, Adeolu A. and Akinwande, Abayomi A. and Balogun, Oluwatosin A. and Olorunfemi, Bayode J. and M., Saravana Kumar (2021) Optimization studies of stir casting parameters and mechanical properties of TiO2 reinforced Al 7075 composite using response surface methodology. Scientific Reports, 11 (1).
Adediran, Adeolu A. and Balogun, Oluwatosin A. and Akinwande, Abayomi A. and Mwema, Fredrick M. and Adesina, Olanrewaju S. and Olayanju, Adeniyi (2021) Effect of Surface Modification on the Properties of Polypropylene Matrix Reinforced with Coir Fibre and Yam Peel Particulate. The Scientific World Journal, 2021. 1�12.
Adediran, Adeolu Adesoji and Akinwande, Abayomi Adewale and Adesina, Olanrewaju S. and Agbaso, Victor and Balogun, Oluwatosin Abiodun and Kumar, B. Ravi (2023) Modeling and optimization of green-Al 6061 prepared from environmentally source materials. Heliyon, 9 (8). e18474.
Adediran, Adeolu Adesoji and Alaneme, Kenneth Kanayo and Oladele, Isiaka (2019) Synthesis of Si-Based Refractory Compounds from Coconut Shell by Carbothermal Method. International Journal of Engineering Research in Africa, 41. 20�25.
Adediran, Adeolu Adesoji and Alaneme, Kenneth Kanayo and Oladele, Isiaka Oluwole and Akinlabi, Esther Titilayo (2019) Processing and structural characterization of Si-based carbothermal derivatives of bamboo leaf. Procedia Manufacturing, 35. 389�394.
Adediran, Adeolu Adesoji and Alaneme, Kenneth Kanayo and Oladele, Isiaka Oluwole and Akinlabi, Esther Titilayo (2019) Processing and structural characterization of Si-based carbothermal derivatives of bamboo leaf. Procedia Manufacturing, 35. 389�394.
Adediran, Adeolu Adesoji and Alaneme, Kenneth Kanayo and Oladele, Isiaka Oluwole and Akinlabi, Esther Titilayo (2020) Wear characteristics of aluminium matrix composites reinforced with Si-based refractory compounds derived from rice husks. Cogent Engineering, 7 (1). p. 1826634.
Adediran, Adeolu Adesoji and Alaneme, Kenneth Kanayo and Oladele, Isiaka Oluwole and Akinlabi, Esther Titilayo and Bayode, Bamidele Lawrence (2021) Effects of milling time on the structural and morphological features of Si-Based refractory compounds derived from selected Agro-Wastes. Materials Today: Proceedings, 38. 928�933.
Adeleke, A.A. and Odusote, J.K. and Lasode, O. A. and Ikubanni, P.P. and Madhurai, M. and Paswan, D. (2019) Evaluation of thermal decomposition characteristics and kinetic parameters of melina wood. Biofuels Journals. ISSN 1759-7269 (Print) 1759-7277 (Online
Adesina, Olanrewaju Seun and Obadele, Babatunde Abiodun and Farotade, Gabriel Ayokunle and Isadare, Dayo Adeyemi and Adediran, Adeolu Adesoji and Ikubanni, Peter Pelumi (2020) Influence of phase composition and microstructure on corrosion behavior of laser based Ti�Co�Ni ternary coatings on Ti�6Al�4V alloy. Journal of Alloys and Compounds, 827. p. 154245.
Adesoji, Adediran Adeolu and Adewale, Akinwande Abayomi and Balogun, Oluwatosin Abiodun and Adesina, Olanrewaju Seun and Ademati, Akeem Oladele and Akeju, Emmanuel A. and Mahamood, Rasheedat M. and Akinlabi, Esther Titilayo (2021) Cement–paperboard composite for speaker/woofer casing: Experimental trend analysis (ETA) and performance evaluation. Cogent Engineering, 8 (1).
Agbabiaka, O.G. and Oladele, I.O. and Akinwekomi, A.D. and Adediran, A.A. and Balogun, A.O. and Olasunkanm, O.G. and Olayanju, T.M.A. (2020) Effect of calcination temperature on hydroxyapatite developed from waste poultry eggshell. Scientific African, 8. e00452.
Akinwande, Abayomi Adewale and Balogun, Oluwatosin Abiodun and Adediran, Adeolu Adesoji and Adesina, Olanrewaju Seun and Romanovski, Valentin and Jen, Tien Chien (2023) Experimental analysis, statistical modeling, and parametric optimization of quinary-(CoCrFeMnNi)100 �x/TiCx high-entropy-alloy (HEA) manufactured by laser additive manufacturing. Results in Engineering, 17. p. 100802.
Akinwekomi, Akeem Damilola and Adebisi, Jeleel Adekunle and Adediran, Adeolu Adesoji (2019) Compressive Characteristics of Aluminum-Fly Ash Syntactic Foams Processed by Microwave Sintering. Metallurgical and Materials Transactions A, 50 (9). 4257�4260.
Daramola, O.O. and Adediran, A.A. and Fadumiye, A.T. (2015) Evaluation of the mechanical properties and corrosion behaviour of coconut shell ash reinforced aluminium (6063) alloy composites. Leonardo Electronic Journal of Practices and Technologies, 14 (27). pp. 107-119.
Edoziuno, F.O. and Adediran, A.A and Adesina, O.S and Oki, Makanjuola and Jen, T.C and Falodun, O.E and Olorunfemi, B.J (2013) Nanomaterials. In: Smart Anticorrosive Materials: Trends and Opportunities. Elsevier, 1�29.
Ikubanni, P.P. and Adediran, A.A and Adeleke, A.A. and Ajao, K.R. and Agboola, O.O. (2017) Mechanical Properties Improvement Evaluation of Medium Carbon Steel Quenched in Different Media. International Journal of Engineering Research in Africa, 32. pp. 1-10.
Ikubanni, P.P. and Adediran, A.A and Adeleke, A.A. and Ajao, K.R. and Agboola, O.O. (2017) nical Properties Improvement Evaluation of Medium Carbon Steel Quenched in Different Media. International Journal of Engineering Research in Africa. (In Press)
Olaniran, Oladayo and Adewale Akinwande, Abayomi and Adesoji Adediran, Adeolu and Jen, Tien-Chien (2023) Process maps and regression models for the physio-thermo-mechanical properties of sintered Al7075-Molybdenum composite. Materials Letters, 332. p. 133527.
